Abstract:A new type of non-oxide sintering additive of YH2 was introduced for the fabrication of AlN ceramics with high thermal conductivity and flexural strength. The effects of YH2 addition (0–5 wt%) on the phase composition, densification, microstructure, thermal conductivity and flexural strength of pressureless sintered AlN ceramics were investigated and compared with those Y2O3-added samples (1–5 wt%). The addition of 1 wt% YH2 led to an in-situ reduction reaction with oxygen impurities, the formation of Y2O3 and finally the formation of yttrium aluminate, which in turn improved densification and microstructure. A high flexural strength (408.69 ± 28.23 MPa) was achieved. The addition of 3 wt% YH2 increased the average grain size and purified the lattice. All these effects are believed to help achieve a high thermal conductivity of 184.82 ± 1.75 W·m−1·K−1. Although the thermal conductivity was close to the value of 3 wt% Y2O3-added sample, its strength was much increased to 381.53 ± 43.41 MPa. Meanwhile, it demonstrated a good combination of the thermal conductivity and flexural strength than the values reported in some literature. However, further increasing the YH2 addition to 5 wt% resulted in a high N/O ratio that inhibited the densification behavior of AlN ceramics. The current study showed that AlN ceramics with excellent thermal and mechanical properties could be obtained by the introduction of a suitable YH2 additive.

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Microstructure and thermal conductivity of aluminium nitride with (YCa)F3 as sintering aid

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3

Thermal Conductivity of AlN Ceramics with CaF2-YF3 Addition

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Effect of YF3 on densification behavior and thermal conductivity of AlN ceramics with Y2O3–YF3 additives under reducing atmosphere

Improving thermal conductivity of aluminum nitride ceramics by refining microstructure

Effects of binary additives B2O3–Y2O3 on the microstructure and thermal conductivity of aluminum nitride ceramics

Microstructure of low-temperature sintered AlN

Effects of Y2O3 and Yttrium Aluminates As Sintering Additives on the Thermal Conductivity of AlN Ceramic Substrates

Transient Liquid-Phase Sintering And Thermal Conductivity Of Ain

Characterization of the Microstructure of Sintered Aln by Sem and Tem

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Effect of Interfacial Structure on the Thermal Conductivity of Carbon Nanofibers Reinforced Aluminum Nitride Composites

Low-Temperature Sintering of AlN Ceramics by Sm 2 O 3 -Y 2 O 3 -Cao Sintering Additives Formed Via Decomposition of Nitrate Solutions

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites

Effects of YH2 addition on pressureless sintered AlN ceramics

Local thermal conductivity of polycrystalline AlN ceramics measured by scanning thermal microscopy and complementary scanning electron microscopy techniques