Abstract:In pursuit of high thermal conductivity of SiC ceramics, this article reports the effects of AlN and sintering atmospheres on the thermal properties and microstructure evolution of SiC ceramics. Dense SiC ceramics with different contents of AlN additive were fabricated through hot-press sintering at 1950°C in Ar/N 2 atmosphere under a pressure of 40 MPa for 3 h. The results showed that the thermal conductivity of samples without AlN addition was 53.5 W.m −1 .K −1 when sintered in Ar and 50.3 W.m −1 .K −1 when sintered in N 2 . The SiC ceramics with 4 wt% AlN sintered in Ar showed abnormally large grains and exhibited the highest thermal conductivity of 121.7 W.m −1 .K −1 among all the samples. The sample with 2 wt% AlN sintered in N 2 exhibited a thermal conductivity of 108.6 W.m −1 .K −1 ; the thermal conductivity deceased with the increasing AlN content afterwards. Such a decreasing trend of thermal conductivity was attributed to the ascending 2H ss content and smaller grains of ceramics. There existed an optimal content of AlN and a proper sintering atmosphere for perfecting the microstructure and the thermal conductivity of SiC ceramics. GRAPHICAL

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Characterization of the Microstructure of Sintered Aln by Sem and Tem

Microstructure of low-temperature sintered AlN

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Investigation on Mechanical Properties of AlON Ceramics Synthesized by Spark Plasma Sintering

Comparative Study on Electrical Conductivity of CeO2-Doped AlN Ceramics Sintered by Hot-Pressing and Spark Plasma Sintering

Microstructure and thermoelectric properties of Zn1−xAlxO ceramics fabricated by spark plasma sintering

Enhanced Properties of Dense Aln Ceramics Via in Situ Reaction

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Local thermal conductivity of polycrystalline AlN ceramics measured by scanning thermal microscopy and complementary scanning electron microscopy techniques

Sintering of β-Si_3N_4 Powder and Thermal Conductivity of the Ceramic

Microstructure and thermal conductivity of aluminium nitride with (YCa)F3 as sintering aid

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3

Effect Of Aln Content On The Pressureless Sintering Behaviors Of Sic-Aln Multiphase Ceramics