Abstract:In this study, the BN-SiC composites were enhanced using individual or composite nano additives (Al2O3, ZrO2) sintered by hot pressing. The phase compositions, microstructure, mechanical properties, and thermal shock resistance of BN-based composites were comparatively investigated. The results showed that: the collaborative addition of nano ZrO2 or Al2O3 stimulated the solid diffusion and promoted the densification behavior. Meanwhile, the BN-SiC composites presented suitable development of BN plates and exhibited excellent structural uniformity due to the nano particles incorporated. As a result, the flexural strengths and fracture toughness of 10 wt% Al2O3 and 10 wt% ZrO2 improved significantly to 355.7 MPa and 5.78 MPa m1/2, respectively. In addition, BN-based composites exhibited excellent thermal shock resistance up to temperature difference (ΔT) = 1200 °C, where no catastrophic failure has been observed for all the specimens except the individual 10 wt% Al2O3 containing specimens. The main enhancing mechanisms were attributable to the “crack deflection”, “crack bridging” and “pulling-out” of BN plates, and the prolonged crack propagation paths along the fine particles.

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity

Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics

Fabrication of machinable AlN–BN composites with high thermal conductivity by pressureless sintering turbostatic BN-coated AlN nanocomposite powders

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Sintering of beta-Si3N4 Powder and Thermal Conductivity of the Ceramic

Sintering of β-Si_3N_4 Powder and Thermal Conductivity of the Ceramic

Effects of Y2O3 and Yttrium Aluminates As Sintering Additives on the Thermal Conductivity of AlN Ceramic Substrates

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Phase composition, microstructure, electrical and thermal properties of TiN and Yb2O3-Sm2O3 doped AlN ceramics

Fabrication of SiC whisker reinforced laminated Si3N4/BN ceramics by spark plasma sintering

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Effect of Tungsten Carbide on Densification and Mechanical Properties of Silicon Nitride Ceramics by Spark Plasma Sintering

New Insight on the Effect of Yttria-Based Secondary Phases on Sintering and Electrical Behavior of Aluminum Nitride Ceramics

Flexural strength, thermal and dielectric properties of AlN ceramics with BN nanoplatelets addition

Investigation on Mechanical Properties of AlON Ceramics Synthesized by Spark Plasma Sintering

The Effect of SiC Content on Microstructure and Microwave Heating Rate of h-BN/SiC Ceramics Fabricated by Spark Plasma Sintering

Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing