Abstract:Porous Si3N4 ceramics are widely used in the aerospace field due to its lightweight, high-strength, and high wave transmission. Traditional manufacturing methods are difficult to fabricate complex structural and functional ceramic parts. In this paper, selective laser sintering (SLS) technology was applied to prepare porous Si3N4 ceramics using AlN as an inorganic binder. And the effects of AlN content on the properties of the obtained ceramic samples were explored. As the AlN content increased, nano-Al2O3 and nano-SiO2 formed the eutectic liquid phase, enhancing the sintering densification and phase transformation of Si3N4 poly-hollow microspheres (PHMs). The island-like partial densification structures in Si3N4 green bodies increased. During the high-temperature sintering, the eutectic liquid phase partially transformed into the mullite phase or reacted with AlN and Si3N4 to form the Sialon phase. With the increase of AlN content, the fracture mode of Si3N4 ceramics changed from fracturing along PHMs to fracturing across PHMs. The bonding depth between PHMs increased and the connection between the grains was tighter, so the Si3N4 ceramics became denser. With the increase of AlN addition, the total porosity of the porous Si3N4 ceramics tended to decrease and the flexural strength gradually increased. When AlN content was 20 wt%, the total porosity and the flexural strength were 33.6% and 23.9 MPa, respectively. The addition of AlN inorganic binder was carried out to develop a novel way to prepare high-performance porous Si3N4 ceramics by SLS.

Enhanced Properties of Dense Aln Ceramics Via in Situ Reaction

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and Thermal Conductivity of Spark Plasma Sintering AlN Ceramics

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Method for fabricating microwave absorption ceramics with high thermal conductivity

High-Thermal-Conductivity AlN Ceramics Prepared from Octyltrichlorosilane-Modified AlN Powder

Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics

RESEARCH ON THE REACTION SYNTHESIS OF AlN-BASED CERAMICS WITH THE ADDITION OF Y2O3

Enhanced mechanical properties and decreased thermal conductivity of porous alumina ceramics by optimizing pore structure

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

Balancing thermal conductivity and strength of hot-pressed AlN ceramics via pre-sintering and annealing process

Fabrication of High Thermal Conductivity Aluminum Nitride Ceramics via Digital Light Processing 3D Printing

Microstructure and thermal conductivity of aluminium nitride with (YCa)F3 as sintering aid

Effects of Li2o on the Low Temperature Sintering and Thermal Conductivity of Aln Ceramics

Transient Liquid-Phase Sintering And Thermal Conductivity Of Ain

Research Progress of Alumina Nitride Ceramics with High Thermal Conductivity

Raction synthesis of Y2O3/A1N ceramic and mechanism of densification

Optimizing AlN hydrolysis process to fabricate coated modified powders for improving the properties of Si 3 N 4 /SiAlON ceramics prepared by Vat Photopolymerization

Effects of AlN inorganic binder on the properties of porous Si3N4 ceramics prepared by selective laser sintering