Abstract:Over the past decade, the cast aluminum alloys with excellent mechanical and conductivity properties have emerged as potential materials for thermal management. However, the traditional Al-Si based alloys are difficult to make significant breakthroughs in conductivity performance. The hypoeutectic Al-5Ni alloy also possesses sound castability and is expected to be applied in thermal management applications. In this study, the effects of ytterbium (Yb element) at 0.0–0.5 wt% on the microstructures as well as the electrical/thermal conductivity and mechanical properties of the Al-5Ni alloy was systematically investigated. The experimental results indicate that the addition of Yb at a relatively low amount not only reduces the secondary dendrite arm spacing of the α-Al grains, but also modifies the morphology and distribution of eutectic boundary phase. Moreover, it is found that the dosage of Yb at 0.3 wt% in the Al-5Ni alloy can simultaneously improve the yield strength, ultimate tensile strength and electrical/thermal conductivity. The strengthening and toughening of the Al-5Ni alloy are mainly attributed to the decrease of secondary dendrite arm spacing and the improvement of eutectic phases. The TEM/SAED analysis indicates that the ytterbium in Al-5Ni alloy would form Al3Yb phase, which mainly agglomerates in the Al3Ni phase region. This phase is helpful to decrease the solubility of impurity elements (e.g., Fe and Si) in the α-Al matrix, which is beneficial to electrical/thermal conductivity. The value of this study lays foundation for manufacturing Al-Ni alloys with high thermal conductivity and acceptable mechanical properties.The trace addition of Yb not only reduces the second dendrite arm spacing (SDAS) of the α-Al grains, but also modifies the morphology and distribution of eutectic boundary phase, which simultaneously improves the thermal conductivity and mechanical properties of Al-5Ni alloy.Download : Download high-res image (325KB)Download : Download full-size image

Effects of binary additives B2O3–Y2O3 on the microstructure and thermal conductivity of aluminum nitride ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Effects of Y2O3 and Yttrium Aluminates As Sintering Additives on the Thermal Conductivity of AlN Ceramic Substrates

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Microstructure and thermal conductivity of aluminium nitride with (YCa)F3 as sintering aid

Microstructure and thermal conductivity of aluminium nitride with (CaY)F3 as the sintering aid

Improving thermal conductivity of aluminum nitride ceramics by refining microstructure

Transient Liquid-Phase Sintering And Thermal Conductivity Of Ain

New Insight on the Effect of Yttria-Based Secondary Phases on Sintering and Electrical Behavior of Aluminum Nitride Ceramics

Effect of CeO2, Dy2O3, Yb 2O3 and y2O3 additives on thermal conductivity of silicon nitride ceramics

Effect of YF3 on densification behavior and thermal conductivity of AlN ceramics with Y2O3–YF3 additives under reducing atmosphere

Phase composition, microstructure, electrical and thermal properties of TiN and Yb2O3-Sm2O3 doped AlN ceramics

Effects of YH2 addition on pressureless sintered AlN ceramics

Thermal Conductivity of AlN Ceramics with CaF2-YF3 Addition

Effect Of Microstructural Modification On Thermal Conductivity And Strength Of Silicon Nitride

Effects of Li2o on the Low Temperature Sintering and Thermal Conductivity of Aln Ceramics

Effects of Al 2O 3 addition on the microstructure and microwave dielectric properties of Ba 4Nd 9.33Ti 18O 54 ceramics

Effect of Post-Sintering Heat-Treatment on Thermal Conductivity of Si3N4 Ceramics Containing Different Additives

Effects of trace ytterbium addition on microstructure, mechanical and thermal properties of hypoeutectic Al–5Ni alloy

Thermal Conductivity of AlN Ceramics Sintered with CaF2 and YF3