Abstract:In this paper, TiC/Al 3 Ti/Al 2 O 3 composite nanoparticles were prepared using Ti, Al, and graphite powders, in a NaCl-KCl molten salt medium. The prepared powders were characterised by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS). The results showed that the one-step method could only directly generate the AlTi 2 C phase, but could not generate the TiC/Al 3 Ti/Al 2 O 3 phase. In the two-step method, the Al, Al 3 Ti, Al 2 Ti, and AlTi phases were used as precursors, and then the graphite powder was added. After sintering at 1000°C for 3 h, the TiC/Al 3 Ti/Al 2 O 3 composite nano-powder was successfully prepared, which can be used as the reinforcement of Al-based composites. During the synthesis process of the TiC/Al 3 Ti/Al 2 O 3 composite nano-powder, the intermediate AlTi 2 C phase was generated first, and the exposed [Ti] in the AlTi 2 C phase adsorbed C to generate the TiC phase. The formation of the TiC phase promoted the decomposition of the AlTi 2 C phase, resulting in the formation of the Al 3 Ti phase. Finally, the residual Al phase in the molten salt was oxidised to the Al 2 O 3 phase during the washing process. Dans cet article, on a préparé des nanoparticules composites de TiC/Al 3 Ti/Al 2 O 3 en utilisant des poudres de Ti, Al et de graphite, dans un milieu de sel fondu de NaCl-KCl. On a caractérisé les poudres préparées par diffraction des rayons x (DRX), microscopie électronique à balayage et spectroscopie à dispersion d'énergie (MEB-EDS) et spectroscopie de photoélectrons X (XPS). Les résultats ont montré que la méthode en une étape ne pouvait engendrer directement que la phase AlTi 2 C, mais ne pouvait pas engendrer la phase TiC/Al 3 Ti/Al 2 O 3 . Dans la méthode en deux étapes, on a utilisé les phases Al, Al 3 Ti, Al 2 Ti et AlTi comme précurseurs, et ensuite, on a ajouté la poudre de graphite. Après frittage à 1000°C pendant 3 h, on a préparé avec succès la nano-poudre composite TiC/Al 3 Ti/Al 2 O 3 , qui peut être utilisée comme le renforcement de composites à base d'Al. Pendant le procédé de synthèse de la nano-poudre composite TiC/Al 3 Ti/Al 2 O 3 , la phase intermédiaire AlTi 2 C a été engendrée en premier, et le [Ti] exposé dans la phase AlTi 2 C a adsorbé C pour engendrer la phase TiC. La formation de la phase TiC a favorisé la décomposition de la phase AlTi 2 C, amenant la formation de la phase Al 3 Ti. Finalement, la phase Al résiduelle dans le sel fondu a été oxydée en phase Al 2 O 3 pendant le procédé de lavage.

A Simple Method for the Synthesis of Nanosized Ti3AlC2powder in NaCl–KCl Molten Salt

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Synthesis of Nano Sized Cr2AlC Powders by Molten Salt Method

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Efficient synthesis of Ti3AlC2 powders with high purity by microwave-assisted molten salt method

A New Method for Preparing Titanium Aluminium Alloy Powder

Facile synthesis of hollow Ti3AlC2 microrods in molten salts via Kirkendall effect

Facile Electrosynthesis of Ti3AlC2 and Its Derived Porous Carbon in Molten Salt

Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization

Green preparation and synthesis mechanism of TiC/Al3Ti/Al2O3 composite nanoparticles

Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt

Facile synthesis of fine Ti–Al intermetallic compound powders via sodiothermic reduction in molten CaCl2

Composition and structure of Ti–Al alloy powders formed by electrochemical co-deposition in KCl–LiCl–MgCl2–TiCl3–AlCl3 molten salt

Molten salt synthesis of titanium carbide using different carbon sources as templates

Synthesis and characterization of submicro-sized V2AlC ceramics by a two-step modified molten salt method

A New Sight on The Influence of Molten Salt in The Preparation of (Ta, Nb, Ti) C Nano‐Powder

Preparation of ti-al based nanophase composite powder by mechanical alloying

Molten Salt Dynamic Sealing Synthesis of MAX Phases (ti3alc2, Ti3SiC2 Et Al.) Powder in Air

Ternary-layered Cr2AlB2 synthesized from Cr, Al, and B powders by a molten salt-assisted method