Abstract:The work aims to obtain TiB2-Ni(Al) composite powder through in-situ synthetic technology. Ni(Al)-based com-posite powder reinforced by TiB2 ceramic phase with different volume contents was prepared by mechanical alloying method under different ball milling time. The molar ratio of Ni and Al was 1:1. The microstructure and phase of ball-milled powder were analyzed with scanning electron microscopy (SEM) and X-ray diffraction (XRD) respectively. The influence of various ball mil-ling time on the phase evolution of TiB2-Ni(Al) composite powder prepared, microstructure and interfacial bonding between particles was studied. In the process of ball milling, with the milling time prolonging, the plastic deformation between Ni/Al was conducive to atom diffusion and the size of TiB2 ceramic phase particle became smaller and smaller. When the ball milling time increased to a certain extent, the Al powder particles of good ductility would be flattened and its surface area became larger. In such case, the broken Ni powder particles were embedded into Al powder particles to finally form Ni(Al) solid solution. Mean-while, according to the analysis of XRD, with the ball milling prolonging, Al peak in TiB2-Ni(Al) composite powder was gradu- ally decreased, which revealed that Al constantly diffused into Ni to form a certain amount of Ni(Al) solid solution. Ni(Al) solid solution can be successfully in-situ synthesized by mechanical ball milling technology after a certain milling time, so it is re-vealed that the inter-diffusion between Ni and Al is in favor of forming Ni(Al) solid solution.

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Microstructure of TiB2-Ni(Al) Composite Powder Prepared by Mechanical Alloying

Nanocrystalline TiB2/Fe3Al Composite Synthesized by Mechanical Alloying

Synthesis of Amorphous Ti-Al Alloys by Mechanical Alloying of Elemental Powders

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Nanostructured Composite Obtained by Mechanically Driven Reduction Reaction of Cuo and Al Powder Mixture

Synthesis of Ti2alc/Al2o3 Nanocomposites by High Energy Milling and Heat Treatment

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

SYNTHESIS OF NANOSTRUCTURED GAMMA-TiAl BASED POWDERS AND BULK ALLOYS USING HIGH ENERGY MECHANICAL MILLING AND HIP

Preparation of TiAl-based alloys by mechanical milling and reactive sintering

Reaction synthesis, microstructure, and mechanical properties of in-situ TiAl-based multiphase composites

Study on reaction synthesis of TiN by mechanical alloying

Structure and Morphology of Ti-Al Composite Powders Treated by Mechanical Alloying

Preparation of Cbnp/Nicral Nanostructured Composite Powders by A Step-Fashion Mechanical Alloying Process

Synthesis Of Tin Nano-Composite Powder By High-Energy Ball Milling Of Tih2 Under Nitrogen Atmosphere

Study on In-Situ Synthesis Process of Ti-Al Intermetallic Compound-Reinforced Al Matrix Composites.

TiB2/TiC nano-composite powder fabricated via high energy milling

Synthesis of NiAl(Cr,Nb) Powder by Mechanical Alloying

In-situ reaction synthesis mechanism of Ti3AlC2/Al2O3/TiAl3 composite from Al/TiO2/TiC system

Phase Formation Regularities of Ultrafine TiAl, NiAl and FeAl Intermetallic Compound Powders During Solid–liquid Reaction Milling