Abstract:W-30Cu/xTiC(x=0～4,wt％) composite powders were prepared by electroless plating with simplified pretreatment.The composite powders were formed by cold compaction under 400 MPa using a tablet machine and green compactions were sintered at 1300 ℃ for 1 h.Micromorphology of the original W and TiC powders,simple-treated W and TiC powders,and as-received W-30Cu/xTiC (x=0～4) composite powders after electroless plating were characterized by field emission scanning electron microscopy (FE-SEM).Microstructures of the W-30Cu/xTiC (x=0～4) composites were also investigated by FE-SEM.The effect of TiC content on the properties of W-30Cu/xTiC (x=0～4) composites (such as relative density,hardness,electrical conductivity,and compressive strength) were studied.Results show that W-30Cu/TiC composite powders with uniform structure are obtained by simplified W and TiC powder pretreatment,followed by electroless copper plating.When TiC content is less than 1 wt％,the compressive strength and hardness of composite materials obviously increase and the electrical conductivity of composite materials decreases with TiC content increasing.However,the electrical conductivity of composite materials is still higher than that of the national standard value.With a certain amount of TiC content to W-30Cu/xTiC (x=0～4) composites,the composites exhibit good comprehensive performance.

Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route

Mechanosynthesis Mechanism of Tic Powders

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Preparation and organization of W-Ni/TiC composite material

Preparation and Characteristics of W–1 Wt.% TiC Alloy Via a Novel Chemical Method and Spark Plasma Sintering

Synthesis of W-TiC composite powders by wet-chemical process and its sintering behavior by SPS

Synthesis of nano (Ti,W)C powder with preferred orientation and twin boundary structure

Microstructure and Performances of W–TiC–Y2O3 Composites Prepared by Mechano-Chemical and Wet-Chemical Methods

Preparation of TiC/W Core–shell Structured Powders by One-Step Activation and Chemical Reduction Process

Stable nanoparticles dispersion induced an unprecedented high strength in a bulk W-TiC alloy

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Microhomogeneous WC-TiC-Co composite powders with enhanced sinterability via a two-step carburization method

Activation Pretreatment of W-1.5wt％TiC Composite Powder and Its Sintering Behavior

TiB2/TiC nano-composite powder fabricated via high energy milling

Preparation of in Situ Synthesis TiC/Ti6Al4V Composite Powder with Homogeneous Dispersion by Electrode Induction Gas Atomization Method

Preparation of Nanometer Size TiC Particulate Reinforcements in Ti Matrix Composites under High Pressure

Influence of TiC Content on Microstructure and Properties of W-3OCu/TiC Composites

Microstructure and Compressive Properties Ofin SituSynthesized TiC/Ti Composites

WC Strengthened W–Cu Nanocomposite Powder Synthesized by In-Situ Reactions

Synthesis and Sintering of Tungsten and Titanium Carbide: A Parametric Study