Abstract:Fine, pure Ti3AlC2 powder is prepared in a very mild condition via Ti3Al alloy and carbon black with the assistance of molten salts. X-ray diffraction, scanning electron microscopy, TG-DSC, and transmission electron microscopy (TEM) characterizations show that the high purity, nanosized Ti3AlC2 can be obtained at 900 degrees C with the 1:1 salt-to-material ratio. The formation mechanism of Ti3AlC2 through this strategy of alloy raw material is fully studied under further TEM investigations, showing that the reaction process can basically be described as Ti3Al and C -> TiAl and TiC -> Ti2AlC and TiC -> psi and TiC -> Ti5Al2C3 and TiC -> Ti3AlC2, where the key psi, a modulated Ti2AlC structure, is determined for the first time containing alternate-displacement Al layers along (0 0 0 2) of Ti2AlC phase with a distinct selected area electron diffraction pattern. Such alternant displacement is considered a precondition of forming Ti5Al2C3 through topotactic transition, followed by Ti5Al2C3 converting into Ti3AlC2 by the diffusion of Ti, C atoms in the outside TiC. Several parallel orientations can be observed through the phase transition process: Ti2AlC (0 0 0 2)//psi (0 0 0 1), psi (0 0 0 1)//Ti5Al2C3 (0 0 0 3), Ti5Al2C3 (0 0 0 3)//Ti3AlC2 (0 0 0 2). Such parallel orientations among these phases apply an ideal condition for the topotactic reaction. The distinct path of the phase transition brings a significant change of heat effect compared with the traditional method, leading to a fast reaction rate and a mild reaction condition.

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

A Simple Method for the Synthesis of Nanosized Ti3AlC2powder in NaCl–KCl Molten Salt

Synthesis of Stoichiometric Titanium Carbide by a Combination of Carbothermal Reduction and Molten Salt Method and Its Characterization

A Novel and Simple Route to Synthesis Nanocrystalline Titanium Carbide Via the Reaction of Titanium Dioxide and Different Carbon Source

Synthesis and characterization of nanosized Ti3AlC2 ceramic powder by elemental powders of Ti, Al and C in molten salt

Synthesis of Ni-TiC Composite Powder Electrochemically in Molten Chlorides

Molten salt synthesis and formation mechanism of Ti<sub>3</sub>AlC<sub>2</sub>: A new path from Ti<sub>2</sub>AlC to Ti<sub>3</sub>AlC<sub>2</sub>

Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt

Study on Preparation of TiC Powder by Molten Salt Electrolysis

Synthesis and Characterization of TiC Nanopowders Via Sol-Gel and Subsequent Carbothermal Reduction Process

A Novel and Simple Method for Large-Scale Synthesis of Nanosized NbC Powder by Disproportionation Reaction in Molten Salt

Carbothermic Reduction Synthesis of Ti(C, N) Powder in the Presence of Molten Salt

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2

In-situ Synthesis of Cr3C2 Nanosheets by Carbon Reduction Route from Cr2AlC

Molten salt synthesis of titanium carbide using different carbon sources as templates

Effect of Molten NaCl on the Synthesis of Ti<sub>3</sub>SiC<sub>2</sub> Powders

A New Sight on the Influence of Molten Salt in the Preparation of (ta, Nb, Ti) C Nanopowder

Molten Salt Synthesis and Characterization of Titanium Carbide-Coated Graphite Flakes for Refractory Castable Applications

Synthesis of Nano Sized Cr2AlC Powders by Molten Salt Method

Low-Temperature Fabrication of TiC Nanotube Arrays by Molten Salt Electrolysis for Supercapacitor Application