Abstract:We report a new and general strategy for improving the capacitive properties of TiO2 materials for supercapacitors, involving the synthesis of hydrogenated TiO2 nanotube arrays (NTAs). The hydrogenated TiO2 (denoted as H-TiO2) were obtained by calcination of anodized TiO2 NTAs in hydrogen atmosphere in a range of temperatures between 300 to 600 degrees C. The H TiO2 NTAs prepared at 400 degrees C yields the largest specific capacitance of 3.24 mF cm(-2) at a scan rate of 100 mV s(-1), which is 40 times higher than thecapacitance obtained from air-annealed TiO2 NTAs at the same conditions. Importantly, H-TiO2 NTAs also show remarkable rate capability with 68% areal capacitance retained when the scan rate increase from 10 to 1000 mV s(-1), as well as outstanding long-term cycling stability with only 3.1% reduction of initial specific capacitance after 10 000 cycles. The prominent electrochemical capacitive properties of H-TiO2 are attributed to the enhanced carrier density and increased density of hydroxyl group on TiO2 surface, as a result of hydrogenation. Furthermore, we demonstrate that H-TiO2 NTAs is a good scaffold to support MnO2 nanoparticles. The capacitor electrodes made by electrochemical deposition of MnO2 nanoparticles on H-TiO2 NTAs achieve a remarkable specific capacitance of 912 F g(-1) at a scan rate of 10 mV s(-1) (based on the mass of MnO2). The ability to improve the capacitive properties of TiO2 electrode materials should open up new opportunities for high-performance supercapacitors.

Low-Temperature Fabrication of TiC Nanotube Arrays by Molten Salt Electrolysis for Supercapacitor Application

Zeolitic Imidazolate Framework Derived ZnCo2O4 Hollow Tubular Nanofibers for Long-Life Supercapacitors

Synthesis of TiC Nanotube Arrays and Their Excellent Supercapacitor Performance

Molten Salt Electrolytic Fabrication of TiC-CDC and Its Applications for Supercapacitor

Design and synthesis of H-TiO 2 /MnO 2 core–shell nanotube arrays with high capacitance and cycling stability for supercapacitors

MnO2–TiO2/C Nanocomposite Arrays for High-Performance Supercapacitor Electrodes

Electrochemically Self-Doped TiO2 Nanotube Arrays for Supercapacitors

Fabrication of TiO2@MnO2 Nanotube Arrays by Pulsed Electrodeposition and Their Application for High-Performance Supercapacitors

Multidimensional Carbon Template Preparation of 3D Multilayered TiC Nanoflakes for High Performance Symmetric Supercapacitor

Three-dimensional Nanobranched TiO2-carbon Nanotube for High Performance Supercapacitors

Tubular TiC fibre nanostructures as supercapacitor electrode materials with stable cycling life and wide-temperature performance

Hydrogenated TiO2 Nanotube Arrays for Supercapacitors.

Ultrahigh Capacitance of TiO2 Nanotube Arrays/c/mno2 Electrode for Supercapacitor

Ultrathin Carbon Layer-Encapsulated TiN Nanotubes Array with Enhanced Capacitance and Electrochemical Stability for Supercapacitors

Coaxial NixCo2 x(OH)6 x/TiN nanotube arrays as supercapacitor electrodes

Fabrication of TiO2 Nanowire Array on Ti-4Al-0.005B Alloy Applied to Supercapacitor Electrodes

Al-Doped TiO2 Nanotube Arrays Achieved by Using Low Boiling AlCl3 As a Dopant Source for Supercapacitors

Hydrothermal Solid-Gas Route to TiO2 Nanoparticles/nanotube Arrays for High-Performance Supercapacitors

High supercapacitance performance of nitrogen-doped Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> prepared by molten salt thermal treatment

Ionothermal Synthesis of Carbon/TiO 2 Nanocomposite for Supercapacitors

TiN Nanosheet Arrays on Ti Foils for High-Performance Supercapacitance