Abstract:Titanium is a highly valued material. Developing a lower-cost titanium (Ti) metal powder production process, potentially substituting the conventional Kroll-HDH method, has challenged the titanium community for decades. The ease of aluminum forming alloys with titanium and the strong chemical affinity of titanium to oxygen rule out the possibility of fabricating pure Ti metal directly by aluminum reduction of TiO2. Based on the demonstrated enhanced deoxidation of Ti using Mg metal, this paper proposes an Al–Mg combined stepwise reduction of TiO2 to fabricate Ti metal powder. Critical challenges overcome in this research include predicting reaction thermodynamics and preparing Ti2O intermediate by Al reduction of TiO2 without significant Al alloying, which is made possible by forming mild-acid soluble Ca12Al14O32Cl2 byproduct. Various Al reduction conditions were investigated and optimized. To the best of our knowledge, it is the first report to fabricate Ti2O powder by Al reduction of TiO2 with a highly stable chemical composition. The difficulty of sintering the Ti2O intermediate before Mg deoxidation to reduce the surface oxygen contribution is mitigated by mixing a certain amount of low-oxygen titanium powder with the Ti2O powder. This allows the densification temperature to be lowered from 1400 °C for sintering pure Ti2O powder to 1100 °C. Even with as much as around 15 wt% oxygen, the sintered powder can be effectively deoxidized by Mg with the help of hydrogen. A titanium metal powder with an oxygen content of 0.134 wt%, an Al content of 0.123 wt%, and other impurities meeting the standard of pure titanium metal powder (GB/T 34486-2017 FTA1) is successfully prepared by the Al reduction-Mg deoxidation combined process. It is a promising alternative for producing titanium metal powder and its derivatives.

Facile synthesis of fine Ti–Al intermetallic compound powders via sodiothermic reduction in molten CaCl2

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

Synthesis of Al{sub 2}o{sub 3}-Tic and Al{sub 2}o{sub 3}-Tib{sub 2} Composite Powders by Combustion Method

Direct Synthesis of Ti-Al Compound Powders by Electrolysis in Molten LiCl-KCl

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Synthesis Of Fe-Doping Aluminum Titanate Powders

A New Method for Preparing Titanium Aluminium Alloy Powder

Precise fabrication of Ti2O from TiO2 by Al reduction towards potentially lower-cost Ti metal powder production

Low-oxygen Ti-6Al-4V alloy powder synthesized by an aluminothermic reduction combined with deoxidation process

Composition and structure of Ti–Al alloy powders formed by electrochemical co-deposition in KCl–LiCl–MgCl2–TiCl3–AlCl3 molten salt

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

Preparation of low-oxygen-containing Ti–48Al–2Cr–2Nb alloy powder by direct reduction of oxides

Molten-salt Synthesis of BaTiO3 Powders and Their Atomic-Scale Structural Characterization

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Production Of Intermetallic Compound Powders Through Hydrogen And Sodium Reduction Of Chlorides

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt