Abstract:The synergistic effect of metallic Ti and Zr as co-dopants on the reversible hydrogen storage properties of NaAlH4 was investigated systematically. Metallic Ti and Zr powders were used directly and separately as dopants, as well as used as co-dopants together in the preparation of NaAlH4 by hydrogenation of ball-milled mixtures of NaH/Al. The hydriding/dehydriding properties of the composites were then investigated. It was found that the addition of Ti and Zr powders together as co-dopants on hydriding/dehydriding properties is superior to doping with Ti or Zr alone. The highest reversible hydrogen capacity of the hydride doped with Ti and Zr together as co-dopants is 4.34wt% at 160∘C. The hydriding rate increases with the hydriding pressure increasing from 7.5 to 11.5MPa. The dehydriding kinetics is improved with the dehydriding temperature increasing from 90 to 130∘C, and the dehydriding rate of the composite doped with Ti and Zr as co-dopants is 1.6 and 2.0 times that of the sample doped with Ti and Zr alone at 130∘C. Microstructure analysis reveals that the improvement of the hydriding/dehydriding properties of NaH/Al (NaAlH4) can be partially ascribed to the in situ interaction of active titanium-hydride and zirconium-hydrides formed in the ball-milling process and subsequently acted as the catalytic active sites on the surface of hydride matrix. The effect of lattice expansion on enthalpy change indicates that the further improved dehydriding property of the composite can also be attributed to a favorable thermodynamic modification of the bulk composite hydride co-doped with Ti–Zr powders. In a word, the synergistic effect on the improvement of hydriding/dehydriding properties by introducing the addition of Ti–Zr together as co-dopants can be ascribed to both the “superficial catalytic process” and the “favorable thermodynamic modification” of the composite.

Production Of Intermetallic Compound Powders Through Hydrogen And Sodium Reduction Of Chlorides

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Improvement on the Kinetic and Thermodynamic Characteristics of Zr1-xNbxCo (x = 0–0.2) Alloys for Hydrogen Isotope Storage and Delivery

Facile synthesis of fine Ti–Al intermetallic compound powders via sodiothermic reduction in molten CaCl2

Chemical Vapor Synthesis of Ultrafine Niobium Powder Via Sodiothermic Reduction of Chloride

Disintegration and Powder Formation of Nb 75 M 25 (M = Al, Si, Ga, Ge, and Sn) Due to Hydrogenation in an Arc-melting Chamber

Production of niobium powder by direct electrochemical reduction of solid Nb2O5 in a eutectic CaCl2-NaCl melt

Disintegration and powder formation of Nb<sub>75</sub>M<sub>25</sub> (M = Al, Si, Ga, Ge and Sn) due to hydrogenation in an arc-melting chamber

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Production of Nb-Zr alloy by aluminothermic reduction-electron beam refining 1st Report. Fundamental Study of Aluminothermic Reduction of Niobium Oxide and Zirconium Oxide.

Characterization of Ternary CuNiCo Metallic Nanoparticles Produced by Hydrogen Reduction

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

The Effect of Reducing Agent on the Production of Niobium Powder by Metallothermic Reduction

Electrodeposition of Nb-Sn Alloy from Sncl2-Nbcl5-Emic Ambient Temperature Molten Salts

Electrodeposition of Nb3sn Alloy Film from Lewis Basic Nbcl5-Sncl2-Emic Melt

Reversible Hydrogen Storage Properties and Favorable Co-Doping Mechanism of the Metallic Ti and Zr Co-Doped Sodium Aluminum Hydride

Powder production of an equimolar NbTaTiZr high-entropy alloy via hydrogen embrittlement

Preparation of Fine Nickel Powders Via Reduction of Nickel Hydrazine Complex Precursors

Production of Niobium Powder by Preform Reduction Process Using Various Fluxes and Alloy Reductant

Selective hydrogen reduction of binary iron-cobalt chlorides