Abstract:To date, the use of ferrous hydrogen in metallurgy is considered from several positions. First, the partial or complete replacement of carbon with hydrogen reduces greenhouse gas emissions of CO2. Secondly, due to the different chemical affinity for oxygen, it becomes possible to selectively (selectively) extract components from complex complex ores and man-made materials. Thirdly, the absence of carbon in the reaction zone will make it possible to obtain a metal with a low content of carbides, which in many cases increases the demand for the product. Thermodynamic calculations of a multicomponent oxide system (Ni, Fe, P, Zn, Mn, V, Cr, O) in the presence of various reducing agents: carbon, hydrogen are performed using the TERRA software package, and their combined effects are considered. It is shown that the type of reducing agent affects the temperature of the beginning of the reduction of metals and the degree of their metallization. Thus, by selecting the type of reducing agent, its quantity, and the temperature of the process, it is possible to selectively extract some metals, and leave others in an oxidized state. Ilmenite concentrate in the form of a briquette was used in laboratory tests. The analysis of the iron reduction process using carbon or hydrogen as a reducing agent has been carried out. In comparison with the results obtained using carbon, the kinetics of iron reduction with hydrogen is higher. At the same time, the reduction proceeds with the formation of metallic iron, rutile (TiO2) and residual ilmenite. Whereas, in a carbothermic process occurring at higher temperatures (1000–1300 °C), the reduction products are iron and iron ditanate (FeTi2O5). In addition, an important advantage of selective reduction by gas is the possibility of subsequent separation of the metallic and oxide phases by melting, without fear of secondary reduction due to solid carbon residues.

Selective hydrogen reduction of binary iron-cobalt chlorides

Hydrogen-based pre-reduction of chromite: Reduction and consolidation mechanisms

Hydrogen technologies for decarbonization of ferrous metallurgy: scientific background and technical capabilities

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Hierarchical nature of hydrogen-based direct reduction of iron oxides

Mineralogical Aspects of Reducing Lump Iron Ore, Pellets, and Sinter with Hydrogen

Correlating Chemical Reaction and Mass Transport in Hydrogen-based Direct Reduction of Iron Oxide

Regulating Iron Species Compositions by Fe-Al Interaction in CO2 Hydrogenation

The Direct Reduction of Iron Ore with Hydrogen

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

New approach to reduce carbon emissions by hydrogen reduction of boron-bearing iron concentrate in a fluidized bed: Reduction kinetics and microstructure analysis

Separation of Li and Co From LiCoO2 Cathode Material Through Aluminothermic Reduction: Investigation of the Thermite Reaction

Hydrogen reduction of spent lithium-ion battery cathode material for metal recovery: Mechanism and kinetics

Minerals phase transformation by hydrogen reduction technology: A new approach to recycle iron from refractory limonite for reducing carbon emissions

Production of clean hydrogen fuel on a bifunctional iron catalyst via chemical loop reforming of methanol

Kinetic Analysis of Molten Oxide Reduction Using Bottom-Blown Hydrogen Injection

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Selective photothermal CO2 reduction to CO, CH4, alkanes, alkenes over bimetallic alloy catalysts derived from layered double hydroxide nanosheets

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Effect of Reducing Cobalt by Multi-alloying on Properties of Hydrogen Storage Alloys

Hydrogen-Based Reduction Ironmaking Process and Conversion Technology