Abstract:Chemical looping hydrogen (CLH) process with renewable energy sources as fuel shows the potential of producing pure hydrogen with inherent capture of CO2 in a low-cost and sustainable way. The heavy fraction (HF) of bio-oil, derived from the fast pyrolysis of biomass and characterized as an energy carrier with difficulty in upgrading itself to bio-fuel or chemicals, was used in this study to generate H-2. Four low-cost iron-based oxygen carriers including an ilmenite and three iron ores were initially evaluated with respect to their reducibility and the ability to minimize carbon or iron carbide (Fe3C) formation in a thermogravimetric analyzer (TGA). The reactivity and cyclic performance of the selected best candidate was then assessed in a laboratory scale fixed-bed reactor with HF bio-oil as fuel. The screening test in TGA showed that ilmenite was superior over the three iron ores in terms of promoting CO conversion and minimizing carbon or Fe3C formation. Ilmenite could maintain its increasing reducibility with the increase of surrounding CO concentration, in contrast with the iron ores that were deactivated seriously by the formed carbon or Fe3C. Subsequent CLH test with ilmenite and HF bio-oil showed that the reducibility and H-2 production capacity of ilmenite were strongly dependent on the operating temperature. The steam oxidation step at 950 degrees C yielded H-2 concentration and hydrogen yield exceeding all of those observed at the other investigated temperatures because of the deepest reduction degree of ilmenite at 950 degrees C. The decrease in the reducibility and H-2 production capacity of ilmenite in the cyclic test could be ascribed to the poorer physical structure of ilmenite with cycles. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Production of clean hydrogen fuel on a bifunctional iron catalyst via chemical loop reforming of methanol

FeRu-based Metal–organic Framework Bifunctional Catalysts for Hydrogen Production and Methanol Electroreforming

Bifunctional Catalyst NiFe–MgAl for Hydrogen Production from Chemical Looping Ethanol Reforming

Efficient Hydrogen Production Through the Chemical Looping Redox Cycle of YSZ Supported Iron Oxides

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Use of Heavy Fraction of Bio-Oil As Fuel for Hydrogen Production in Iron-Based Chemical Looping Process

Optimization of nickel-iron bimetallic oxides for coproduction of hydrogen and syngas in chemical looping reforming with water splitting process

Superparamagnetic Iron Oxide Nanoparticles on ZrO2 as Catalysts for CO2 Hydrogenation to Lower Olefins

Engineering Hydrogen Generation Sites to Promote Electrocatalytic CO2 Reduction to Formate

Coupling Methanol Oxidation with Hydrogen Evolution on Bifunctional Co‐Doped Rh Electrocatalyst for Efficient Hydrogen Generation

Reactive ball-milling synthesis of Co-Fe bimetallic catalyst for efficient hydrogenation of carbon dioxide to value-added hydrocarbons

Iron-promoted zirconia-alumina supported Ni catalyst for highly efficient and cost-effective hydrogen production via dry reforming of methane

Chemical Looping Reforming for Syngas Production with Co-Conversion of CH4 and CO2 by Using Ilmenite Ore As Both Oxygen Carrier and Catalyst

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

Separate H2 and CO production from CH4-CO2 cycling of Fe-Ni

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO 2 Hydrogenation to Valuable Hydrocarbons

Direct Carbon Dioxide Hydrogenation to Long-Chain Α-Olefins over FeMnK Catalysts

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Carbon Dioxide Reduction with Hydrogen on Fe, Co Supported Alumina and Carbon Catalysts under Supercritical Conditions

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO2 Hydrogenation to Valuable Hydrocarbons

Bimetallic Fe‐Promoted Catalyst for CO‐Free Hydrogen Production in High‐Temperature‐Methanol Steam Reforming