Abstract:This study has been proposed to increase the efficiency of the chemical loop process. Iron oxide doped with cobalt was used as a bifunctional material because of catalyst and oxygen carrier properties and methanol was used as a reducing agent. The co-precipitation method was used to synthesis of Co/Fe oxide. To evaluate the performance of the synthesized catalysts, a microchannel reactor was designed and built with a parallel channel arrangement. To increase H 2 /coke ratio, the effect of different amounts of cobalt (10, 20, and 30 %) in Fe 2 O 3 catalyst has been investigated. Then, the optimal amount of cobalt concentration was selected for investigation of reduction temperature from 350 to 450 °C. The results showed that increasing the Co concentration to 30 % and increasing the temperature of the reduction step to 450 °C causes the catalytic reactions to start in a shorter time and the process efficiency increases due to the high H 2 /coke ratio. The repeated cycles investigation of the 0.3CoFe 2 O 4 during 10 redox cycles showed decreased oxidation power and low stability. To enhance the oxidation power and stability, applying two-step reoxidation and adding Zr (30, 40 and 50 %) in the catalyst structure were examined. In the next step, using optimized Zr content (40%), to achieve pure H 2 stream for fuel cell applications, the reaction time of the reduction step was optimized. The results showed that during reduction times of 7 min, coke formation was prevented and pure H 2 (99.9999%) was produced. Finally, the stability of the 0.3CoFe 2 O 4 -ZrO 2 during 50 redox cycles in reduction time of 7 min showed that the use of Zr maintains the stability of the catalyst.

Efficient Hydrogen Production Through the Chemical Looping Redox Cycle of YSZ Supported Iron Oxides

Iron Oxides with Gadolinium-Doped Cerium Oxides As Active Supports for Chemical Looping Hydrogen Production

Redox reactivity of titania‐doped YSZ‐promoted iron‐based oxygen carrier over multiple redox cycles for chemical looping reforming of methane and hydrogen production

Cu–Fe–Al–O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Generation

Chemical-looping water splitting over ceria-modified iron oxide: Performance evolution and element migration during redox cycling

A Mixed Spinel Oxygen Carrier with Both High Reduction Degree and Redox Stability for Chemical Looping H2 Production

Mn-Fe-Al-O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Production with CO2 Capture

The Use of Ferrites As Highly Active Oxygen Storage Materials for Chemical Looping Hydrogen Production under Intermediate Temperature

Gd, La co-doped CeO2 as an active support for Fe2O3 to enhance hydrogen generation via chemical looping water gas shift

Earth Abundant Spinel for Hydrogen Production in a Chemical Looping Scheme at 550 °C

Ternary Mixed Spinel Oxides As Oxygen Carriers for Chemical Looping Hydrogen Production Operating at 550 °C

Utilizing high entropy oxide (Ni0.2Co0.2Ca0.2Cu0.2Mg0.2)Fe2O4 in chemical looping process for highly efficient and stable hydrogen production

In Situ Regulating Cobalt/Iron Oxide‐Oxyhydroxide Exchange by Dynamic Iron Incorporation for Robust Oxygen Evolution at Large Current Density

Production of clean hydrogen fuel on a bifunctional iron catalyst via chemical loop reforming of methanol

Enhanced Hydrogen Production Performance at Intermediate Temperatures Through the Synergistic Effects of Binary Oxygen Carriers

Reactivity of Iron-based Oxygen Carriers Prepared by Wet and Dry Mixing Methods for Hydrogen Production Via Biomass Derived Syngas Chemical Looping

A High-Performance Ternary Ferrite-Spinel Material for Hydrogen Storage Via Chemical Looping Redox Cycles

Highly sintering-resistant iron oxide with a hetero-oxide shell for chemical looping water splitting

High-Purity Hydrogen Obtained via a Plasma-Assisted Chemical Looping Process Using Perovskite-Supported Iron Oxides as Oxygen Carriers

Chemical Looping Hydrogen Storage and Production: Use of Binary Ferrite-Spinel As Oxygen Carrier Materials

Oxygen Vacancy Modulation for Enhanced Hydrogen Production via Chemical Looping Water-Gas Shift