Abstract:A plasma-assisted chemical looping system for the production of H2 (PCLH) was investigated in this study. This system allows the partial oxidation of CH4 at mild temperatures (573–773 K). Four active oxygen carriers: Fe2O3, NiO-impregnated Fe2O3 (NiO/Fe2O3), SrFeO3−δ and NiO-impregnated SrFeO3−δ (NiO/SrFeO3−δ) were compared, each working both as a packed material for the plasma reactor and an oxygen source for the partial oxidation of CH4. Similar conversions of CH4, and low yields of H2 were obtained in Fe2O3 and SrFeO3−δ. It was concluded that in these cases, H2 was mainly produced from direct cracking of CH4 by plasma. In contrast, when using NiO/Fe2O3 and NiO/SrFeO3−δ, substantial production of H2 was achieved. It is proposed that there is a synergistic effect between the catalyst and the oxygen carrier; the presence of the metallic Ni phase was responsible for catalysing the production of H2, and the oxygen from the support helped prevent the build-up of coke. As a result, the activity of Ni was continuously maintained for H2 production. The chemical loop is closed with the oxygen carriers being regenerated in air with plasma and then used in the next looping cycle. The high H2 production capability in NiO/Fe2O3 was repeatable; whilst, NiO/SrFeO3−δ deactivated in the second and third cycles. Amongst the temperatures studied, NiO/Fe2O3 at 673 K resulted in the best performance for H2-rich gas production. A further increase in the operating temperature led to a total combustion of CH4.

High-Purity Hydrogen Obtained via a Plasma-Assisted Chemical Looping Process Using Perovskite-Supported Iron Oxides as Oxygen Carriers

The Use of Ferrites As Highly Active Oxygen Storage Materials for Chemical Looping Hydrogen Production under Intermediate Temperature

Utilizing high entropy oxide (Ni0.2Co0.2Ca0.2Cu0.2Mg0.2)Fe2O4 in chemical looping process for highly efficient and stable hydrogen production

Iron Oxides with Gadolinium-Doped Cerium Oxides As Active Supports for Chemical Looping Hydrogen Production

Performance of Fe2O3/LaFeO3 as oxygen carrier in chemical-looping hydrogen generation

Efficient Hydrogen Production Through the Chemical Looping Redox Cycle of YSZ Supported Iron Oxides

Cu–Fe–Al–O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Generation

Earth Abundant Spinel for Hydrogen Production in a Chemical Looping Scheme at 550 °C

Oxygen Vacancy Modulation for Enhanced Hydrogen Production via Chemical Looping Water-Gas Shift

Mn-Fe-Al-O Mixed Spinel Oxides As Oxygen Carrier for Chemical Looping Hydrogen Production with CO2 Capture

Plasma Chemical Looping: Unlocking High-Efficiency CO2 Conversion to Clean CO at Mild Temperatures

Enhanced Hydrogen Production Performance at Intermediate Temperatures Through the Synergistic Effects of Binary Oxygen Carriers

A Mixed Spinel Oxygen Carrier with Both High Reduction Degree and Redox Stability for Chemical Looping H2 Production

High-purity hydrogen production from real biomass pyrolysis vapors via a chemical looping process

H2 production from a plasma-assisted chemical looping system from the partial oxidation of CH4 at mild temperatures

Gd, La co-doped CeO2 as an active support for Fe2O3 to enhance hydrogen generation via chemical looping water gas shift

Hydrogen generation from water splitting over polyfunctional perovskite oxygen carriers by using coke oven gas as reducing agent

Interaction of Iron Oxide with Alumina in a Composite Oxygen Carrier during the Production of Hydrogen by Chemical Looping

Pentalithium Ferrite (Li5FeO4) as Highly Active Material for Hydrogen Production in the Chemical Looping Partial Oxidation of Methane

Review of Hydrogen Production from the Steam-Iron Process by Chemical-Looping Combustion