Reactivity of Iron-based Oxygen Carriers Prepared by Wet and Dry Mixing Methods for Hydrogen Production Via Biomass Derived Syngas Chemical Looping

yue hu,wei wang,xiuning hua
DOI: https://doi.org/10.1016/j.egypro.2014.12.184
2014-01-01
Energy Procedia
Abstract:In the hydrogen production by chemical looping process using syngas derived from biomass, iron-based oxygen carriers are very important which can react with steam to produce pure hydrogen. In this paper, wet and dry mixing methods were used to prepare iron-based oxygen carriers supported on Al2O3. The mass ratio of Fe203 was 70% and all the Fe2O3/Al2O3 oxygen carriers were calcined at 950 degrees C for 6h. H-2-Temperature Programmed Reductions (TPR) and reduction reaction with H-2 at temperatures range from 800 degrees C to 950 degrees C were carried out on a TGA. The results showed that 900 degrees C was the best temperature to realize the highest reduction conversion of oxygen carriers. Oxygen carriers prepared by both methods were further tested in a fixed bad reactor for 10 cycles to produce hydrogen. The results showed that particles prepared by dry mixing method had high reactivity in the hydrogen production by chemical looping in a fixed bed reactor which got the hydrogen yield about 2200nmol H-2/g Fe2O3. (C) 2014 Published by Elsevier Ltd.
What problem does this paper attempt to address?