Abstract:In this paper, we consider the advantage of using the metallothermic method for producing alloys, in contrast to traditional methods. Using the HSC Chemistry 6.1 software package, thermodynamic modeling was performed. The possibility of obtaining intermetallic compounds by the joint aluminothermic reduction of Zr, Ta, Nb oxides is shown. The alloy was obtained by aluminothermic reduction of aluminum, zirconium, tantalum and niobium oxides in a resistance furnace, followed by grinding and powder size 40-100 microns. An experimental study of the sequence of phase formation and the boundaries of their existence was investigated using differential thermal analysis (DTA). The experiment was carried out on a STA 449 F3 Jupiter (NETZSCH) synchronous thermal analysis instrument in an argon flow GOST 10157-79 (the volume fraction of argon is at least 99.993%), the flow rate of the gas used was 30 ml/min. X-ray phase analysis (XRD) of the products (after DTA) was carried out on an XRD 7000 diffractometer (Shimadzu). By the relative intensity of the lines of the various phases, their quantitative ratio was estimated. The diffraction patterns were decoded using literature data, as well as the JCPDS (International Center For Diffraction Data) and ASTM (American Society for Testing and Materials) databases. According to the obtained XRD data, in the sample at temperatures of 954.5 and 1309.1 oС, respectively, the formation of a solid solution (Zr, Nb, Ta)Al2 occurs, which is isostructural to the intermetallic Al3Zr. In both cases, the concomitant ZrAl2 intermetallic compound is also formed. The performed study can serve as a scientific basis for the development of promising metallothermal technologies for the production of rare metal alloys.

Production of Nb-Zr alloy by aluminothermic reduction-electron beam refining 1st Report. Fundamental Study of Aluminothermic Reduction of Niobium Oxide and Zirconium Oxide.

Direct production of the Nb-10%W-l%Zr-0.1%C alloys from the constituent metal oxides by the combined carbothermal reduction-electron beam melting method

Nb–Ta alloys by aluminothermic reduction of Nb2O5/Ta2O5 mixtures and electron beam melting

Preparation and Melting of Zr-1.0Nb Alloy

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Production of Neutron-Absorbing Zirconium-Boron Alloy by Self-Propagating High-Temperature Synthesis and Its Refining via Electron Beam Melting

Production of Niobium Powder by Preform Reduction Process Using Various Fluxes and Alloy Reductant

Production of niobium powder by direct electrochemical reduction of solid Nb2O5 in a eutectic CaCl2-NaCl melt

Study of the aluminothermic reduction of niobium pentoxide through thermal analysis experiments and high energy milling processing

Production of Al-Zr Master Alloy by Electrolysis of the KF-NaF-AlF3-ZrO2 Melt: Modifying Ability of the Master Alloy

Effectively Refining Al-10Si Alloy Via Al-Ti-Nb-B Refiner with Nb2O5

Investigation of the features of phase formation in the joint aluminothermic reduction of ZrO2, Ta2O5, Nb2O5

OBTENÇÃO DE Nb METÁLICO ATRAVÉS DA REDUÇÃO DE Nb2O5 POR MOAGEM DE ALTA ENERGIA

Abnormal Alloying Behaviour Observed in an Immiscible Zr–Nb System

Synthesis of High-Entropy Alloy AlTiZrVNb by Aluminothermic Reaction

Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace

Investigation of the formation and distribution of elements in the production of Al-Ti-V-Zr-Nb alloys by the aluminothermic method

Purification of Niobium by Electron Beam Melting

Study of Aluminothermic Reduction Conditions With Plasma Ignition

Production of niobium powder by electronically mediated reaction (EMR) using calcium as a reductant

Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting