Abstract:Electron beam melting (EBM) is a promising powder bed fusion additive manufacturing (AM) technology for the preparation of complex refractory components due to the significant advantages of vacuum environment and high level in energy utilization, scanning speed and temperature in the build chamber. However, the fabrication of crack-free and refined W-based alloy remains a challenge. This study aims to address this problem by introducing 0.7 wt% carbon in EBM W-3.5Nb alloy. Results revealed that the as built W-3.5Nb alloy had a typical columnar structure with obvious solidification cracks along the grain boundary. Doping 0.7 wt% carbon generated refined microstructure, which was composed of the initial dendrite of tungsten and the eutectic phase in the dendrites gap. Due to the low distribution coefficient of carbon, the nucleation at the bottom of the molten pool was caused by constitutional supercooling in the front of liquid solidification in a single molten pool, and velocity of the solidification front was reduced by carbon concentration leading increased thermal supercooling. Supercooling (thermal supercooling together with constitutional supercooling) refined the microstructure of W-3.5Nb alloy effectively. Meanwhile, due to the formation of eutectic phase with low melting point, the fluidity of liquid phase at the terminal solidification was improved and the solidification cracks along the grain boundary were reduced. The carbon addition also played a significant role in alloy strengthening. The microhardness of the alloy increased from 382 HV to 696 HV, and the compressive strength increased from 962.89 MPa to 1892.56 MPa. These findings offer a new perspective on the AM fabrication of high-quality W-based alloys.

Direct production of the Nb-10%W-l%Zr-0.1%C alloys from the constituent metal oxides by the combined carbothermal reduction-electron beam melting method

Production of Nb-Zr alloy by aluminothermic reduction-electron beam refining 1st Report. Fundamental Study of Aluminothermic Reduction of Niobium Oxide and Zirconium Oxide.

Improvement on the Kinetic and Thermodynamic Characteristics of Zr1-xNbxCo (x = 0–0.2) Alloys for Hydrogen Isotope Storage and Delivery

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Processing of Nb–10W alloy via aluminothermic reduction–electron beam melting and evaluation of its cold plastic deformation behaviour

Preparation and Melting of Zr-1.0Nb Alloy

Preparation and Characterization of Nb-1Zr-0.1C Alloy Suitable for Liquid Metal Coolant Channels of High Temperature Reactors

Doping N/O Impurities into a MoNbTiWZr Refractory Multi-Principal Element Alloy and the Strengthening Mechanism

Nb–Ta alloys by aluminothermic reduction of Nb2O5/Ta2O5 mixtures and electron beam melting

Refined W-3.5Nb alloy fabricated by electron beam melting via doped carbon

Improved mechanical properties of W-Zr-Ti-Nb alloys via adding Ti and Nb

Precipitation behavior in a Nb-5W-2Mo-1Zr niobium alloy fabricated by electron beam selective melting

Electron Beam Melting of Niobium Alloys from Blended Powders

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Mechanical properties and strengthening mechanism of the nano-sized m-ZrO 2 ceramic particle reinforced NbMoTaW refractory high-entropy alloy

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Selective electron beam melting of WMoTaNbVFeCoCrNi refractory high-entropy alloy

Enhanced strength and plasticity in a Nb2MoWC0.5 alloy via eutectic dilute carbide

New β-type Ti-Zr-V-Nb alloys used for laser-based direct energy deposition: Design, microstructure, and properties

Molecular dynamics simulation of gradient alloying distribution on the nano-mechanical properties of Nb-Zr alloys

Investigation of the formation and distribution of elements in the production of Al-Ti-V-Zr-Nb alloys by the aluminothermic method