Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Processing of Nb–10W alloy via aluminothermic reduction–electron beam melting and evaluation of its cold plastic deformation behaviour

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Microstructure and High Temperature Compressive Properties of Nb-based Alloys Fabricated by Plasma Arc-Induction Hybrid Melting

Direct production of the Nb-10%W-l%Zr-0.1%C alloys from the constituent metal oxides by the combined carbothermal reduction-electron beam melting method

Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy

Effect of heat treatment and thermomechanical processing on microstructure and tensile property of Ti-44Al-8Nb-0.2W-0.2B-0.5Y alloy

A novel Nb-W-C alloy with special microstructure and excellent mechanical property

Microstructure and Elevated Temperature Tensile Property of Ti–46Al–7Nb-(W,Cr,B) Alloy Compared with Binary and Ternary TiAl Alloy

Influence of alloying element Nb on the γ′ phase structure and mechanical properties of Co–8.8Al–9.8W alloy

Microstructure and mechanical properties of a 2 wt% Nb bearing low carbon steel

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

PART 1-Symposium E-Intermetallics & High Temperature Alloys-Microstructure and Tensile Properties of Hot Worked High Nb Containing TiAl Alloy on Industrial Scale

Electron Beam Melting of Niobium Alloys from Blended Powders

Mechanical properties of Nb based multiphase alloy studied by nanoindentation and atomic force microscopy

Refined W-3.5Nb alloy fabricated by electron beam melting via doped carbon

Precipitation behavior in a Nb-5W-2Mo-1Zr niobium alloy fabricated by electron beam selective melting

Synthesis of TiAl/Nb Composites with Concurrently Enhanced Strength and Plasticity by Powder Metallurgy

Microstructure refinement and improvement of mechanical properties of Ti46Al8Nb0.9B alloys by electromagnetic cold crucible continuous solidification

Enhanced strength and plasticity in a Nb2MoWC0.5 alloy via eutectic dilute carbide