Abstract:Additive manufacturing (AM) is a highly promising technique for producing near-net-shape high-value aerospace components with intricate geometries. However, due to the susceptibility to hot cracking, high-volume-fraction Ni 3 (Al,Ti)-type precipitation-strengthened Ni-base superalloys typically used for these applications are usually difficult or even infeasible to manufacture via AM. Previous metallurgical methods to mitigate hot-cracking in AM usually compromise strength, resulting in a trade-off between hot-cracking resistance and strength. Here, we overcome this trade-off in AM of a multicomponent Ni-rich precipitation-strengthened high-entropy alloy (MNiHEA) Ni 46.23 Co 23 Cr 10 Fe 5 Al 8.5 Ti 4 W 2 Mo 1 C 0.15 B 0.1 Zr 0.02 (at%): synergizing remarkable hot-cracking resistance and ultrahigh strength. Crack-free MNiHEA is successfully fabricated via laser powder bed fusion (LPBF) without preheating, despite its high (Al+Ti) content of ∼7.4 wt%. This remarkable resistance to hot cracking arises from the comparatively low critical solidification range, the small average solidification cracking index, the suppression of the intermetallic phases in solidification, and the moderate hardening rate induced by the nanoprecipitates in aging, which are intrinsically imparted by thermodynamic and mechanical characteristics. The yield strength of the as-built-to-aged MNiHEA reaches ∼1.2 gigapascal, together with acceptable ductility. This ultrahigh strength outperforms its cast-to-aged counterpart by more than one-third and existing commercial superalloys CM247 and IN738LC. Such pronounced enhancement in strength is attained through multiple strengthening mechanisms, including solid-solution hardening, dislocation hardening, precipitation-hardening and grain-boundary strengthening. Our results demonstrate that intrinsic hot-cracking resistance can be utilized as a new metallurgical concept for mitigating hot-cracking without compromising strength in AM of high-temperature materials such as HEAs and superalloys.

Near crack free additive manufacturing of a novel W-Nb-C alloy

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

Refined W-3.5Nb alloy fabricated by electron beam melting via doped carbon

Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength

A Novel Performance Optimization Study in Additively Manufactured Tungsten-5 Wt.%rhenium Alloys Reinforced with Dilute Carbon

Mechanical properties and microstructural characteristics of additively manufactured C103 niobium alloy

A precipitation strengthened high entropy alloy with high (Al+Ti) content for laser powder bed fusion: Synergizing in trinsic hot cracking resistance and ultrahigh strength

Cracking in Laser Additively Manufactured W: Initiation Mechanism and a Suppression Approach by Alloying

Computational design of a crack-free aluminum alloy for additive manufacturing

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

A new class of alumina-forming superalloy for 3D printing

Crack Suppression in Additively Manufactured Tungsten by Introducing Secondary-Phase Nanoparticles into the Matrix

On the strength and fracture toughness of an additive manufactured CrCoNi medium-entropy alloy

Cracking suppression in selective electron beam melted WMoTaNbC refractory high-entropy alloy

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

Porosity control and properties improvement of Al-Cu alloys via solidification condition optimisation in wire and arc additive manufacturing

Avoiding Cracks in Additively Manufactured Non-Weldable Directionally Solidified Ni-based Superalloys

Effect of Carbon Content on the Microstructure, Tensile Properties and Cracking Susceptibility of IN738 Superalloy Processed by Laser Powder Bed Fusion

Microalloying Design in Directed Energy Deposition of Complex-Concentrated Alloy: Pre-Nitriding to Inhibit Hot Cracking and Promote Mechanical Properties

Laser powder bed fusion of an Al-Cr-Fe-Ni high-entropy alloy produced by blending of prealloyed and elemental powder: process parameters, microstructures and mechanical properties

Microstructure and Properties of a Novel Ni-Ti-Cr-Mo-Nb Alloy Fabricated in Situ by Dual-Wire Arc Additive Manufacturing