Abstract:CoCrNi medium entropy alloy additive part was fabricated by laser directed energy deposition process. Based on an optimized additive manufacturing process parameters, the microstructure, tensile properties and corrosion performance in the XOY and XOZ planes were compared to learn the anisotropic properties of the additive part. The majority of the additive parts consisted of equiaxed grains, a small proportion consisted of elongated needle-like grains. The equiaxed and elongated needle-like grains in the XOY plane were finer compared to that in the XOZ plane. The corrosion electrochemical activity is uniform in the XOY plane, but varies at different heights in the XOZ plane base on scanning vibrating electrode technique results. Electron backscatter diffraction results near the fracture indicated a larger and relatively more homogeneous residual stress peak in the XOY plane. The tensile and yield strengths in the XOZ plane were lower than those in the XOY plane by approximately 98.5 MPa and 19.1 MPa. While the elongation in the XOZ plane was more than twice as high as that in the XOY plane. The reason for the anisotropic tensile behavior was the strong texture in the XOY plane and the relatively random grain orientation in the XOZ plane. Single crystal and polycrystalline molecular dynamics were used to simulate the anisotropic tensile properties in the XOZ and XOY planes. Single crystal simulation results showed that the maximum stress was 19.0 GPa and elongation was 13.0% when the stretching was along the [110] crystal orientation. The minimum stress was 17.1 GPa and elongation is 11.1% elongation when the stretching was along the [11 ] crystal orientation. Anisotropy existed for CrCoNi alloys in terms of tensile properties along different orientations. Polycrystalline simulation in the XOY plane results showed that the main cause of anisotropy between them was the tangling of the 1/6 dislocations and the 1/6 dislocations, which caused obstacles to dislocation motion and thus improved the strength of CoCrNi additive parts. High tensile strength in the XOY plane, not the XOZ plane, was attributed to 1/6 and 1/6 dislocation tangles at the (1 0)/(115) planes.

On the strength and fracture toughness of an additive manufactured CrCoNi medium-entropy alloy

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys close to liquid helium temperatures

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Superior Strength-Ductility Synergy in Additively Manufactured CoCrFeNi High-Entropy Alloys with Multi-Scale Hierarchical Microstructure

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure

Microstructure and Mechanical Properties of Novel CrCoNi–Al2O3P Medium Entropy Alloy-Matrix Composites

Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion

A strong fracture-resistant high-entropy alloy with nano-bridged honeycomb microstructure intrinsically toughened by 3D-printing

Dynamic Behavior of Additively Manufactured FeCoCrNi High Entropy Alloy

Outstanding fracture toughness combines gigapascal yield strength in an N-doped heterostructured medium-entropy alloy

Strength-ductility synergy of additively manufactured (CoCrNi)<sub>87</sub>Al<sub>13</sub> medium entropy alloy with heterogeneous multiphase microstructure

Anisotropic microstructure, properties and molecular dynamics simulation of CoCrNi medium entropy alloy fabricated by laser directed energy deposition

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance

Accelerated Emergence of CoNi-based Medium-Entropy Alloys with Emphasis on Their Mechanical Properties

Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Compositional regulation in additive manufacturing of precipitation-hardening (CoCrNi) 94 Ti 3 Al 3 medium-entropy superalloy: cellular structure stabilization and strength enhancement

Microstructural features and excellent compression properties of a novel Al0.7CoCrFeNiTi0.3 high entropy alloy