Abstract:This study explored a multi-mechanism approach to improving the mechanical properties of a CoCr-FeMnNi high-entropy alloy through non-equiatomic alloy design and processing.The alloy design en-sures a single-phase face-centered cubic structure while lowering the stacking fault energy to encour-age the formation of deformation twins and stacking faults by altering the equiatomic composition of the alloy.The processing strategy applied helped create a hierarchical grain size gradient microstructure with a high nanotwins population.This was achieved by means of rotationally accelerated shot peen-ing(RASP).The non-equiatomic CoCrFeMnNi high-entropy alloy achieved a yield strength of 750 MPa,a tensile strength of 1050 MPa,and tensile uniform elongation of 27.5％.The toughness of the alloy was 2.53×1010 kJ/m3,which is about 2 times that of the same alloy without the RASP treatment.The strength increase is attributed to the effects of grain boundary strengthening,dislocation strengthening,twin strengthening,and hetero-deformation strengthening associated with the heterogeneous microstruc-ture of the alloy.The concurrent occurrence of the multiple deformation mechanisms,i.e.,dislocation deformation,twining deformation and microband deformation,contributes to achieving a suitable strain hardening of the alloy that helps to prevent early necking and to assure steady plastic deformation for high toughness.

Strengthening CoCrNi medium-entropy alloy by tuning lattice defects

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

Exceptional high-strain-rate tensile mechanical properties in a CrCoNi medium-entropy alloy

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Breaking the trade-off between strength and ductility in nanostructured CrCoNi-based medium-entropy alloys by promoting twinning kinetics

Exceptional strength-ductility synergy of additively manufactured CoCrNi medium-entropy alloy achieved by lattice defects in heterogeneous microstructures

Contribution of coherent precipitates on mechanical properties of CoCrFeNiTi 0.2 high-entropy alloy at room and cryogenic temperatures

Advanced mechanical properties obtained via accurately tailoring stacking fault energy in Co-rich and Ni-depleted CoxCr33Ni67-x medium-entropy alloys

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects

Enhancing cryogenic yield strength and ductility of the Al 0.1 CoCrFeNi high-entropy alloy by synergistic effect of nanotwins and dislocations

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy

Real-time Nanoscale Observation of Deformation Mechanisms in CrCoNi-based Medium- to High-Entropy Alloys at Cryogenic Temperatures

Achieving Excellent Strength-Ductility Balance in Single-Phase CoCrNiV Multi-Principal Element Alloy

Chemical Short-Range Ordering in a CrCoNi Medium-Entropy Alloy

Room-temperature super-elongation in high-entropy alloy nanopillars