Abstract:In recent developments, Cu–Cr–Nb alloys have emerged as promising materials offering a desirable balance between mechanical properties and electrical conductivity, rendering them suitable for intricate high heat flux applications. However, the laser additive manufacturing of Cu–Cr–Nb alloys has encountered notable challenges, primarily stemming from limitations associated with Cu–Cr–Nb alloy powders. Recognizing the pivotal role of powder feedstock in additive manufacturing, this study exerts the utilization of ball milling techniques to tackle pertinent challenges. Specifically, a kind of powder obtained by mechanical ball milling of elemental powders of Cu, Cr and Nb is employed to fabricate Cu–Cr–Nb raw materials, which exhibits a distinctive sesame ball structure and effectively mitigates the inherent high reflectivity of Cu powder. The resulting milled powder represents a notable departure from the conventional reliance on argon gas atomization for Cu–Cr–Nb alloy powder production. Then the study encompasses the fabrication of five distinct Cu–Cr–Nb bulk alloys, ranging from Cu–1Cr–0.5Nb to Cu–12Cr–6Nb, using laser directed energy deposition. The as-printed Cu–Cr–Nb alloys exhibit commendable density, surpassing 99% based on visual analysis, and demonstrate mechanical properties akin to casts achieved through traditional melting and powder metallurgy methods. Notably, Cr 2 Nb particles were observed within all bulk alloys, with their size increasing proportionally with the Cr + Nb content. Tensile strength demonstrated a positive correlation with Cr + Nb content, while elongation and conductivity exhibited an inverse relationship. These findings hold considerable promise for advancing the utilization of Cu–Cr–Nb alloys in various applications requiring tailored performance characteristics.

Electron Beam Melting of Niobium Alloys from Blended Powders

Feasibility of Melting NbC Using Electron Beam Powder Bed Fusion

Laser powder bed fusion of pure Nb and Nb + WC powder mixture

Pure niobium manufactured by Laser-Based Powder Bed Fusion: influence of process parameters and supports on as-built surface quality

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

Precipitation behavior in a Nb-5W-2Mo-1Zr niobium alloy fabricated by electron beam selective melting

Mechanical properties and microstructural characteristics of additively manufactured C103 niobium alloy

Ti-48Al-2Cr-2Nb alloys prepared by electron beam selective melting additive manufacturing: microstructural and tensile properties

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

Refined W-3.5Nb alloy fabricated by electron beam melting via doped carbon

Processing of Niobium-Alloyed High-Carbon Tool Steel via Additive Manufacturing and Modern Powder Metallurgy

Near crack free additive manufacturing of a novel W-Nb-C alloy

Manufacturing of a nanosized TiB strengthened Ti-based alloy via electron beam powder bed fusion

Purification of Niobium by Electron Beam Melting

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder

Development of an Alternative Manufacturing Technology for Niobium Components

In-Situ Alloy Formation of a WMoTaNbV Refractory Metal High Entropy Alloy by Laser Powder Bed Fusion (PBF-LB/M)

Processing, Properties and Applications of High-Temperature Niobium Alloys

Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties

Multi-scale numerical simulation of the thermodynamic characteristics of Nb particles reinforced Zr-based amorphous composites by SLM