Abstract:Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Feasibility of Melting NbC Using Electron Beam Powder Bed Fusion

Electron Beam Melting of Niobium Alloys from Blended Powders

Laser powder bed fusion of pure Nb and Nb + WC powder mixture

NbC-BASED CERMET PRODUCTION COMPARISON: L-PBF ADDITIVE MANUFACTURING VERSUS CONVENTIONAL LPS POWDER METALLURGY

Pure niobium manufactured by Laser-Based Powder Bed Fusion: influence of process parameters and supports on as-built surface quality

Developing New Materials for Electron Beam Melting: Experiences and Challenges

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

Dual-Material Electron Beam Selective Melting: Hardware Development and Validation Studies

Non-Equilibrium Solidification Behavior With Solute Trapping Associated With Powder Characteristics During Electron Beam Additive Manufacturing

Establishing a process route for additive manufacturing of NiCu-based Alloy 400: an alignment of gas atomization, laser powder bed fusion, and design of experiments

AN INTRODUCTORY DISCUSSION ABOUT 1200 Kw EB FURNACE MELTING PROCESS

A systematic approach to optimize parameters in manufacturing complex lattice structures of NiTi using electron beam PBF process

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder

Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing

Effect of different thermomechanical processing on structure and mechanical properties of electron beam melted niobium

Microstructural Refinement of Niobium for Superconducting RF Cavities

PBF-EB of Fe-Cr-V Alloy for Wear Applications

Improved Process Efficiency in Laser-Based Powder Bed Fusion of Nanoparticle Coated Maraging Tool Steel Powder

Manufacturing of Stereolithographic 3D Printed Boron Nitride Nanotube-Reinforced Ceramic Composites with Improved Thermal and Mechanical Performance

Multiple Preheating Processes for Suppressing Liquefaction Cracks in IN738LC Superalloy Fabricated by Electron Beam Powder Bed Fusion (EB-PBF)

Laser Powder Bed Fusion Processing of Low Cost CoCrFeNiMoxNby High Entropy Alloys with Promising High-Temperature Properties via In Situ Alloying Commercial Powders