Pure niobium manufactured by Laser-Based Powder Bed Fusion: influence of process parameters and supports on as-built surface quality

Silvia Candela,Pietro Rebesan,Diego De Bortoli,Simone Carmignato,Filippo Zanini,Valentina Candela,Razvan Dima,Adriano Pepato,Markus Weinmann,Paolo Bettini

DOI: https://doi.org/10.1007/s00170-024-13249-9

IF: 3.563

2024-02-26

The International Journal of Advanced Manufacturing Technology

Abstract:Abstract Niobium (Nb) is a transition metal commonly used as an alloying element for increasing strength, toughness, corrosion resistance, and other properties of steel and superalloys. Pure Nb, however, is a very interesting metal for its excellent superconductivity. This makes it suitable for producing superconducting magnets and devices for particle acceleration systems and particle physics research (e.g., superconducting resonant cavities). In this work, the production of Nb by the Laser-Based Powder Bed Fusion (PBF-LB/M, also known as Laser Powder Bed Fusion or LPBF) process was examined. Manufacturing parameters were investigated to achieve additively manufactured parts with a relative density higher than 99.5% and showing a down-skin surface roughness in the range of 20–70 μm, depending on the inclination angle. Studies related to the limiting angle of self-supported Nb parts were also conducted, and innovative non-contact supporting structures were successfully developed. These allowed to creation of parts with very small overhang angles, without compromising the downward-facing surfaces; indeed at the same time, the as-built surface finish was improved.

engineering, manufacturing,automation & control systems

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve

The paper primarily explores various process parameters and their impact on the surface quality of the final product when manufacturing pure niobium (Nb) using Laser Powder Bed Fusion (PBF-LB/M) technology. Specifically, the research focuses on the following aspects:

1. **Increasing Density**: By adjusting process parameters such as laser power, scanning speed, and hatch spacing, the goal is to achieve additively manufactured parts with a relative density greater than 99.5%.
2. **Improving Surface Roughness**: Particularly optimizing the quality of the down-skin surface to reduce defects such as dross formation and deformation.
3. **Study of Self-Supporting Angles**: Exploring the minimum self-supporting angle of pure niobium in the PBF-LB/M process and developing innovative non-contact support structures to allow the manufacturing of parts with very small overhang angles without compromising the quality of the down-skin surface.

Through these studies, the paper aims to improve the process conditions for the additive manufacturing of pure niobium, thereby enhancing the surface quality and overall performance of the final product.