Abstract:Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals often requires non-equilibrium processing routes, which typically limit the specimen size and require large energy budgets. In this study, multiple dopant elements in ternary Al alloys are deliberately selected to enable segregation to the grain boundary region and promote the formation of amorphous complexions. Three different fully dense bulk nanocrystalline Al alloys (Al-Mg-Y, Al-Fe-Y, and Al-Ni-Y) with small grain sizes were successfully fabricated using a simple powder metallurgy approach, with full densification connected directly to the onset of amorphous complexion formation. All the compositions demonstrate densities above 99% with grain sizes <60 nm following consolidation via hot pressing at 585 °C. The very fine grain structure results in excellent mechanical properties, as evidenced by nanoindentation hardness values in the range of 2.2-2.8 GPa. Detailed microstructural characterization verifies the segregation of all dopant species to grain boundaries as well as the formation of amorphous complexions, which suggests their influential role in aiding effective consolidation and endowing thermal stability in the alloys. Moreover, nanorods with a core-shell structure are also observed at the grain boundaries, which likely contribute to the stabilization of the grain structure while also strengthening the materials. Finally, intermetallic particles with sizes of hundreds of nanometers form in all systems. As a whole, the results presented here demonstrate a general alloy design strategy of segregation and boundary evolution pathway that enables the fabrication of multiple nanocrystalline Al alloys with hierarchical microstructures and improved performance.

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Amorphous Intergranular Films Enable the Creation of Bulk Nanocrystalline Cu-Zr with Full Density

Nano-sized Amorphous Cu–Zr Alloy Particles Prepared by Mechanochemical Reaction

Bulk Nano-Crystalline Alloys FeYB and CuZrAl by Direct Casting

Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process

Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

Growth Mechanism from Nano-Ordered Clusters to Nanocrystals in a Deeply Undercooled Melt of Zr-Ni-Ti Metallic Glass

Nano-alloys Synthesized by Controlled Crystallization from Supercooled Atomic Clusters of Elements

Is Cu60Ti10Zr30 a Bulk Glass-Forming Alloy?

Multi-principal element grain boundaries: Stabilizing nanocrystalline grains with thick amorphous complexions

Deformation behavior of Zr-based bulk nanocrystalline amorphous alloys

Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting

Insights into the structure sustainable evolution and crystallization kinetics of amorphous Mg60Ni30La10 alloy

Nanocrystalline Zr3Al made through amorphization by repeated cold rolling and followed by crystallization

Structure of the amorphous, massive-metallic-glass forming Ni 25 Zr 60 Al 15 alloy from molecular dynamics simulations

Study on isothermal crystallization kinetics of Zr55.7Cu22.4Ni7.2Al14.7 bulk amorphous alloy

Preparation of bulk nanolaminated aluminum alloy with high strength

Bulk nanostructured Al-Si alloy with remarkable improvement in strength and ductility