Abstract:Nanocrystalline materials are usually unstable—nanograins coalesce even at low temperatures; this results in loss of mechanical/functional properties in service. The addition of solute‐element to the nanocrystalline material is traditionally‐used to offset excess energy at grain boundaries that drives coarsening, an approach adjudged complex for multi‐component‐alloys. In this article, a novel alloy‐design strategy for designing/developing nanocrystalline‐multicomponent‐alloys is proposed. Grain growth is prevalent in nanocrystalline (NC) materials at low homologous temperatures. Solute element addition is used to offset excess energy that drives coarsening at grain boundaries (GBs), albeit mostly for simple binary alloys. This thermodynamic approach is considered complicated in multi‐component alloy systems due to complex pairwise interactions among alloying elements. Guided by empirical and GB‐segregation enthalpy considerations for binary‐alloy systems, a novel alloy design strategy, the "pseudo‐binary thermodynamic" approach, for stabilizing NC‐high entropy alloys (HEAs) and other multi‐component‐alloy variants is proposed. Using Al25Co25Cr25Fe25 as a model‐HEA to validate this approach, Zr, Sc, and Hf, are identified as the preferred solutes that would segregate to HEA‐GBs to stabilize it against growth. Using Zr, NC‐Al25Co25Cr25Fe25 HEAs with minor additions of Zr are synthesized, followed by annealing up to 1123 K. Using advanced characterization techniques— in situ X‐ray diffraction (XRD), scanning/transmission electron microscopy (S/TEM), and atom probe tomography, nanograin stability due to coupling self‐stabilization and solute‐GB segregation effects is reported in HEAs up to substantially high temperatures. The self‐stabilization effect originates from the preferential GB‐segregation of constituent HEA‐elements that stabilizes NC‐Al25Co25Cr25Fe25 up to 0.5Tm (Tm–melting temperature). Meanwhile, solute‐GB segregation originates from Zr segregation to NC‐Al25Co25Cr25Fe25 GBs; this results in further stabilization of the phase and grain‐size (≈14 nm) up to ≈0.58 and ≈0.64Tm, respectively.

Multi-principal element grain boundaries: Stabilizing nanocrystalline grains with thick amorphous complexions

Thick amorphous complexion formation and extreme thermal stability in ternary nanocrystalline Cu-Zr-Hf alloys

High-Temperature Stability and Grain Boundary Complexion Formation in a Nanocrystalline Cu-Zr Alloy

Binary nanocrystalline alloys with strong glass forming interfacial regions: Complexion stability, segregation competition, and diffusion pathways

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Amorphous complexions alter the tensile failure of nanocrystalline Cu-Zr alloys

Emergence of near-boundary segregation zones in face-centered cubic multi-principal element alloys

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Amorphous Intergranular Films Enable the Creation of Bulk Nanocrystalline Cu-Zr with Full Density

Grain boundary complexions and the strength of nanocrystalline metals: Dislocation emission and propagation

Thermal stability of the multicomponent nanocrystalline Ni–ZrNbMoTa alloy

Materials selection rules for amorphous complexion formation in binary metallic alloys

Mechanical Behavior and Thermal Stability of Nanocrystalline Metallic Materials with Thick Grain Boundaries

Amorphous complexions enable a new region of high temperature stability in nanocrystalline Ni-W

Exceptional thermal stability of nanostructured FeCoNiCrCu high entropy alloy facilitated by unusual grain boundary segregation

Segregation competition and complexion coexistence within a polycrystalline grain boundary network

Frustrated metastable-to-equilibrium grain boundary structural transition in NbMoTaW due to segregation and chemical complexity

Critical cooling rates for amorphous-to-ordered complexion transitions in Cu-rich nanocrystalline alloys

High-throughput first-principles investigation on grain boundary segregation of alloying elements in ferritic steel

Design and Development of Stable Nanocrystalline High‐Entropy Alloy: Coupling Self‐Stabilization and Solute Grain Boundary Segregation Effects