Abstract:CoCrNi medium entropy alloy (MEA) exhibits significant potential as a structural component for engineering applications. However, the traditional processing methods for pursuing the superior mechanical properties of CoCrNi MEA are often time-consuming and inefficient. Laser powder bed fusion (LPBF) offers substantial processing flexibility without the need for complex secondary processing. In this study, we optimized the processing parameters for CoCrNi MEA through an orthogonal experimental design, achieving as-printed CoCrNi components with a relative density of up to 99.4%. The microstructure of the as-printed CoCrNi revealed hierarchical features, including the molten pools, equiaxed and elongated columnar grains, sub-grain cellular microstructures, and high-density dislocation networks. The mechanical properties of as-printed CoCrNi were exceptional, demonstrating a synergistic combination of strength and ductility (yield strength: approximately 660.91 MPa, tensile strength: approximately 892.78 MPa, elongation: approximately 33.28%, and a product of strength and elongation: 27.45 GPa%). Experimental characterization elucidated the activation and interplay of mechanisms such as dislocations, stacking faults, twinning-induced plasticity, and transformation-induced plasticity. These mechanisms collaboratively enhanced the refinement and heterogeneity of substructures, thereby endowing the as-printed CoCrNi with significant strength-ductility synergy. Molecular dynamics simulations indicated that, in the initial stages of plastic deformation, a significant activation of Shockley partial dislocations occurred, leading to the formation of stacking faults and the emergence of Hexagonal Close-Packed (HCP) phases. As plastic deformation progressed, a reverse phase transformation from HCP to Face-Centered Cubic (FCC) took place, resulting in the formation of nanotwins. This transformation generated a heterogeneous microstructure comprised of both nanotwins and HCP phases, suggesting a sequential twinning and phase transformation pathway in as-printed CoCrNi: from FCC to HCP, and subsequently to FCC nanotwins.

Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Laser powder bed fusion of an Al-Cr-Fe-Ni high-entropy alloy produced by blending of prealloyed and elemental powder: process parameters, microstructures and mechanical properties

On the banded microstructures in CoCrMo-Ni in-situ alloyed through laser powder bed fusion

High throughput in-situ synthesis of Fe-Cr-Ni alloys via laser powder bed fusion: exploring the microstructure and property evolution

Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength

Research on the Mechanical Properties of AlCoCrFeNi + CoCrNi Fabricated by Laser Melting Deposition

Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Introduction of nanoprecipitation into supersaturated CoCrFeNiMo0.5 alloy prepared by laser-powder bed fusion via microstructure tailoring to achieve excellent properties

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying

Synergistic strengthening of crack-free Al–Zn–Mg–Cu alloys with hierarchical microstructures achieved via laser powder bed fusion

In-situ synthesis of nitrides and oxides through controlling reactive gas atmosphere during laser-powder bed fusion of Fe-12Cr-6Al

Hierarchical eutectic structure and superior mechanical property in low cobalt content AlCo0.2CrFeNi2.1 alloy by laser metal deposition

In-situ synthesis of CoCrFeMnNi high-entropy alloy by selective laser melting

Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles

Microstructure Evolution of FeNiCoCrAl1.3Mo0.5 High Entropy Alloy during Powder Preparation, Laser Powder Bed Fusion, and Microplasma Spraying

Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion

Hierarchical Eutectoid Nano-lamellar Decomposition in an Al0.3CoFeNi Complex Concentrated Alloy

Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties