Abstract:CoCrNi medium entropy alloy (MEA) exhibits significant potential as a structural component for engineering applications. However, the traditional processing methods for pursuing the superior mechanical properties of CoCrNi MEA are often time-consuming and inefficient. Laser powder bed fusion (LPBF) offers substantial processing flexibility without the need for complex secondary processing. In this study, we optimized the processing parameters for CoCrNi MEA through an orthogonal experimental design, achieving as-printed CoCrNi components with a relative density of up to 99.4%. The microstructure of the as-printed CoCrNi revealed hierarchical features, including the molten pools, equiaxed and elongated columnar grains, sub-grain cellular microstructures, and high-density dislocation networks. The mechanical properties of as-printed CoCrNi were exceptional, demonstrating a synergistic combination of strength and ductility (yield strength: approximately 660.91 MPa, tensile strength: approximately 892.78 MPa, elongation: approximately 33.28%, and a product of strength and elongation: 27.45 GPa%). Experimental characterization elucidated the activation and interplay of mechanisms such as dislocations, stacking faults, twinning-induced plasticity, and transformation-induced plasticity. These mechanisms collaboratively enhanced the refinement and heterogeneity of substructures, thereby endowing the as-printed CoCrNi with significant strength-ductility synergy. Molecular dynamics simulations indicated that, in the initial stages of plastic deformation, a significant activation of Shockley partial dislocations occurred, leading to the formation of stacking faults and the emergence of Hexagonal Close-Packed (HCP) phases. As plastic deformation progressed, a reverse phase transformation from HCP to Face-Centered Cubic (FCC) took place, resulting in the formation of nanotwins. This transformation generated a heterogeneous microstructure comprised of both nanotwins and HCP phases, suggesting a sequential twinning and phase transformation pathway in as-printed CoCrNi: from FCC to HCP, and subsequently to FCC nanotwins.

Hierarchical eutectic structure and superior mechanical property in low cobalt content AlCo0.2CrFeNi2.1 alloy by laser metal deposition

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Microstructures and Mechanical Properties of CrMnFeCoNi High Entropy Alloys Fabricated Using Laser Metal Deposition Technique

Ultrasounds Induced Eutectic Structure Transition and Associated Mechanical Property Enhancement of FeCoCrNi2.1Al High Entropy Alloy

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Unique Strength-Ductility Balance of AlCoCrFeNi2.1 Eutectic High Entropy Alloy with Ultra-Fine Duplex Microstructure Prepared by Selective Laser Melting

New Insight into the Strengthening Mechanism of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy with Dual-Phase Nanolamellar Structures Achieved Via Laser Powder Bed Fusion

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

Ultrahigh-strength and Ductile CoCrFeNi-based High-Entropy Alloys Manufactured by Laser Powder Bed Fusion with Multiple Strengthening Mechanisms

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification

Superior Strength-Ductility Synergy in Additively Manufactured CoCrFeNi High-Entropy Alloys with Multi-Scale Hierarchical Microstructure

Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion

Microstructures and Room Temperature Tensile Properties of As-Cast and Directionally Solidified AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Co x (CrNi) 100-x alloy

Microstructure and properties of AlCoCrFeNi 2.1 eutectic high entropy alloy manufactured by selective laser melting

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition

Effect of Cu-Rich Phase Precipitation on the Microstructure and Mechanical Properties of CoCrNiCux Medium-Entropy Alloys Prepared via Laser Directed Energy Deposition

Microstructural Origins of Enhanced Work Hardening and Ductility in Laser Powder-Bed Fusion 3D-Printed AlCoCrFeNi2.1 Eutectic High-Entropy Alloys