Abstract:CoCrNi medium entropy alloy additive part was fabricated by laser directed energy deposition process. Based on an optimized additive manufacturing process parameters, the microstructure, tensile properties and corrosion performance in the XOY and XOZ planes were compared to learn the anisotropic properties of the additive part. The majority of the additive parts consisted of equiaxed grains, a small proportion consisted of elongated needle-like grains. The equiaxed and elongated needle-like grains in the XOY plane were finer compared to that in the XOZ plane. The corrosion electrochemical activity is uniform in the XOY plane, but varies at different heights in the XOZ plane base on scanning vibrating electrode technique results. Electron backscatter diffraction results near the fracture indicated a larger and relatively more homogeneous residual stress peak in the XOY plane. The tensile and yield strengths in the XOZ plane were lower than those in the XOY plane by approximately 98.5 MPa and 19.1 MPa. While the elongation in the XOZ plane was more than twice as high as that in the XOY plane. The reason for the anisotropic tensile behavior was the strong texture in the XOY plane and the relatively random grain orientation in the XOZ plane. Single crystal and polycrystalline molecular dynamics were used to simulate the anisotropic tensile properties in the XOZ and XOY planes. Single crystal simulation results showed that the maximum stress was 19.0 GPa and elongation was 13.0% when the stretching was along the [110] crystal orientation. The minimum stress was 17.1 GPa and elongation is 11.1% elongation when the stretching was along the [11 ] crystal orientation. Anisotropy existed for CrCoNi alloys in terms of tensile properties along different orientations. Polycrystalline simulation in the XOY plane results showed that the main cause of anisotropy between them was the tangling of the 1/6 dislocations and the 1/6 dislocations, which caused obstacles to dislocation motion and thus improved the strength of CoCrNi additive parts. High tensile strength in the XOY plane, not the XOZ plane, was attributed to 1/6 and 1/6 dislocation tangles at the (1 0)/(115) planes.

Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Co x (CrNi) 100-x alloy

Effect of Cu-Rich Phase Precipitation on the Microstructure and Mechanical Properties of CoCrNiCux Medium-Entropy Alloys Prepared via Laser Directed Energy Deposition

Hierarchical eutectic structure and superior mechanical property in low cobalt content AlCo0.2CrFeNi2.1 alloy by laser metal deposition

Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion

Effect of Cobalt-Content on Mechanical Properties of Non-Equiatomic Co–Cr–Ni Medium Entropy Alloys

Anisotropic microstructure, properties and molecular dynamics simulation of CoCrNi medium entropy alloy fabricated by laser directed energy deposition

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Effect of copper on microstructural evolution and mechanical properties of laser-welded CoCrFeNi high entropy alloy

Inhibiting cracking and improving strength for additive manufactured Al x CoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC

Advanced mechanical properties obtained via accurately tailoring stacking fault energy in Co-rich and Ni-depleted CoxCr33Ni67-x medium-entropy alloys

Effects of Mo content on the microstructure and mechanical properties of laser cladded FeCoCrNiMo x (x = 0.2, 0.5) high-entropy alloy coatings

Effect of Al Addition on the Microstructure and Mechanical Properties of Al x CrCoNi Medium Entropy Alloys Prepared via the Magnetron Co‐Sputtering

Phase transformation - induced strengthening of an additively manufactured multi- principal element CrMnFeCoNi alloy

Effect of Deposit Scale on Mechanical Properties of In-Situ Alloyed CrCoNi Medium Entropy Alloys Formed by Directed Energy Deposition

Plastic deformation mechanism of CoCrxNi medium entropy alloys

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Influence of in-situ and ex-situ precipitations on microstructure and mechanical properties of additive manufacturing CoCrFeMnNi high-entropy alloys

Introduction of nanoprecipitation into supersaturated CoCrFeNiMo0.5 alloy prepared by laser-powder bed fusion via microstructure tailoring to achieve excellent properties