Abstract:The trade-off between strength and ductility remains a significant challenge for high-entropy alloys (HEAs). The layer-by-layer printing manner inherent in the laser powder bed fusion (L-PBF) leads to distinctive microstructures in alloys, in turn yielding unexpected performances that are promising for resolving this contradiction. At present, the influence of L-PBF technology on the microstructures and mechanical properties of near-eutectic HEAs has yet to be explored. In the present work, a metastable AlCo 0.4 CrFeNi 2.7 hypoeutectic HEA with an extraordinary strength-ductility combination was successfully fabricated using L-PBF. The precipitation behaviors and mechanical properties of the alloy were further modulated through annealing. The results reveal that the high cooling rates inherent in L-PBF promote the formation of a "pseudoeutectic" structure featuring the face-centered-cubic (FCC) + body-centered-cubic (BCC) dual-phase nanolamellae. Furthermore, after annealing at 600-750 °C, the L1 2 and B2 precipitates are generated in the FCC lamellae, accompanied by a coarsening of the original Cr-rich precipitates (BCC) in the BCC lamellae. The as-printed sample exhibits remarkable mechanical properties, posing a yield strength of 1007 MPa, an ultimate strength of 1249 MPa, and a total elongation of ∼25.1%. After annealing at 750 °C, the tensile yield strength and ultimate strength are further increased to 1201 MPa and 1512 MPa, respectively, while the elongation is maintained at ~15.1%. The analysis results demonstrate that the high strength originates from the hard BCC lamellae and nanolamellar interfaces, while the good ductility stems from the soft FCC lamellae and coordinated deformation of the dual-phase nanolamellae. Furthermore, the strength increase is further substantiated through the introduction of annealing-induced nanoprecipitates, thereby contributing to additional precipitation strengthening.

Inhibiting cracking and improving strength for additive manufactured Al x CoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Microstructural origins of enhanced work hardening and ductility in laser powder-bed fusion 3D-printed AlCoCrFeNi 2.1 eutectic high-entropy alloys

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Al0.6CoCrFeNi High-Entropy Alloy

Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion

Improving mechanical properties of an FCC high-entropy alloy by γ′ and B2 precipitates strengthening

Surface hardening of CrCoFeNi high-entropy alloys via Al laser alloying

Strengthening Al0.1CoCrFeNi high-entropy alloy via multiaxial cryogenic forging and low temperature annealing

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Laser additively manufactured crack-free aluminum-bearing high entropy alloys: alloy design, synthesis, cracking inhibition and microstructure evolution effects on their tensile properties

Effect of annealing treatment on microstructural evolution and compressive behavior of Al0.5CrFeNi2.5Si0.25 high-entropy alloy

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Nanoscale B2 precipitation and strengthening behavior in Al0.5CoCrFeNi high-entropy alloy

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Selective laser melting of AlCoCrFeMnNi high entropy alloy: Effect of heat treatment

Significant transitions of microstructure and mechanical properties in laser additive manufacturing AlCoCrFeNi 2.1 eutectic high-entropy alloy under heat treatment