Abstract:Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals often requires non-equilibrium processing routes, which typically limit the specimen size and require large energy budgets. In this study, multiple dopant elements in ternary Al alloys are deliberately selected to enable segregation to the grain boundary region and promote the formation of amorphous complexions. Three different fully dense bulk nanocrystalline Al alloys (Al-Mg-Y, Al-Fe-Y, and Al-Ni-Y) with small grain sizes were successfully fabricated using a simple powder metallurgy approach, with full densification connected directly to the onset of amorphous complexion formation. All the compositions demonstrate densities above 99% with grain sizes <60 nm following consolidation via hot pressing at 585 °C. The very fine grain structure results in excellent mechanical properties, as evidenced by nanoindentation hardness values in the range of 2.2-2.8 GPa. Detailed microstructural characterization verifies the segregation of all dopant species to grain boundaries as well as the formation of amorphous complexions, which suggests their influential role in aiding effective consolidation and endowing thermal stability in the alloys. Moreover, nanorods with a core-shell structure are also observed at the grain boundaries, which likely contribute to the stabilization of the grain structure while also strengthening the materials. Finally, intermetallic particles with sizes of hundreds of nanometers form in all systems. As a whole, the results presented here demonstrate a general alloy design strategy of segregation and boundary evolution pathway that enables the fabrication of multiple nanocrystalline Al alloys with hierarchical microstructures and improved performance.

Bulk Nano-Crystalline Alloys FeYB and CuZrAl by Direct Casting

Bulk Nano-Crystalline Alloys

Bulk nano-crystalline Fe-based alloys by annealing bulk glassy precursors

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

NbB2 Modified Al–Cu Alloys Fabricated by Freeze-Ablation Casting under High Cooling Rate Solidification

Development of high Bs Fe–Ni-based metal amorphous nanocomposite by optimization of glass-forming ability

Quantitative Crystallization and Nano-Grain Size Distribution Studies of a Fecunbsib Nanocrystalline Alloy

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Preparation and Properties of Fe_(73-χ)Nb_4Hf_3Y_χB_(20)bulk Amorphous Alloys

The Progress in Research of Nano-Crystallization of Amorphous Alloys

Amorphous Intergranular Films Enable the Creation of Bulk Nanocrystalline Cu-Zr with Full Density

Bulk amorphous and nanocrystalline alloys with high functional properties

Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process

Strong and thermally stable nanocrystalline Cu–Al alloy via Al segregation

Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system

Is Cu60Ti10Zr30 a Bulk Glass-Forming Alloy?

Binary nanocrystalline alloys with strong glass forming interfacial regions: Complexion stability, segregation competition, and diffusion pathways

Nano-alloys Synthesized by Controlled Crystallization from Supercooled Atomic Clusters of Elements

Nanocrystallization of Cu46Zr33.5Hf13.5Al7 Metallic Glass