Abstract:Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals often requires non-equilibrium processing routes, which typically limit the specimen size and require large energy budgets. In this study, multiple dopant elements in ternary Al alloys are deliberately selected to enable segregation to the grain boundary region and promote the formation of amorphous complexions. Three different fully dense bulk nanocrystalline Al alloys (Al-Mg-Y, Al-Fe-Y, and Al-Ni-Y) with small grain sizes were successfully fabricated using a simple powder metallurgy approach, with full densification connected directly to the onset of amorphous complexion formation. All the compositions demonstrate densities above 99% with grain sizes <60 nm following consolidation via hot pressing at 585 °C. The very fine grain structure results in excellent mechanical properties, as evidenced by nanoindentation hardness values in the range of 2.2-2.8 GPa. Detailed microstructural characterization verifies the segregation of all dopant species to grain boundaries as well as the formation of amorphous complexions, which suggests their influential role in aiding effective consolidation and endowing thermal stability in the alloys. Moreover, nanorods with a core-shell structure are also observed at the grain boundaries, which likely contribute to the stabilization of the grain structure while also strengthening the materials. Finally, intermetallic particles with sizes of hundreds of nanometers form in all systems. As a whole, the results presented here demonstrate a general alloy design strategy of segregation and boundary evolution pathway that enables the fabrication of multiple nanocrystalline Al alloys with hierarchical microstructures and improved performance.

Bulk Nano-Crystalline Alloys

Bulk nano-crystalline Fe-based alloys by annealing bulk glassy precursors

Bulk Nano-Crystalline Alloys FeYB and CuZrAl by Direct Casting

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Designing aluminum-rich bulk metallic glasses via electronic-structure-guided microalloying

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Nanocrystallization of Cu46Zr33.5Hf13.5Al7 Metallic Glass

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

Sm-based Sm-Al-Ni ternary bulk metallic glasses

Co- and Fe-based multicomponent bulk metallic glasses designed by cluster line and minor alloying

Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing

A Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase Separation

Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses

Nanocrystal composites in Zr–Nb–Cu–Al metallic glasses

Abnormal isochronous crystallization behavior of Zr-Al-Ni-Cu-Fe-C bulk metallic glasses

Formation of CuZr-based Bulk Metallic Glass Composites Containing Nanometer-Scale B2-CuZr Phase Through Sub-Tg Annealing

Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system

Ternary Sm–Al–Ni Bulk Metallic Glasses

A Complex Multicomponent Bulk Metallic Glass/ultrafine-Nanocrystal Composite Fabricated under Industrial-Applicable Condition

A CuZr-based Bulk Metallic Glass Composite with Excellent Mechanical Properties by Optimizing Microstructure