Abstract:Fe-based amorphous alloys are well known for their good magnetic properties including ultrahigh saturation magnetization, low coercive force, high magnetic permeability and low core loss. But these alloys were only prepared into ribbon form in early times due to their insufficient glass-forming abilities (GFAs). The present work focuses on the design of Fe-B-Si-Nb bulk metallic glasses with good soft magnetic properties and high glass forming ability. Glass formation in Fe-B system is first considered with cluster-plus-glue-atom model. A basic composition formula [B-B2Fe8]Fe is proposed as the framework for multi-component alloy design. Considering the structural stability of the model glass, Si and Nb are introduced to the [B-B2Fe8] cluster to replace the center B and shell Fe atoms, from which a series of Fe-B-Si-Nb alloys with composition formulas [Si-B2Fe8-xNbx] Fe (x=0.1 similar to 1.2) are derived. Copper mold casting experiments revealed that bulk glass alloys with a critical diameter (d(c)) exceeding 1.0 mm are readily obtained with the Nb content range of x=0.2 similar to 1.2, the largest d(c) (about 2.5 mm) appears in the vicinity of x=0.4 similar to 0.5. Considering the local packing efficiency of Fe-B-Si-Nb glass model structure, another series alloy compositions, namely, [(Si1-yBy)-B2Fe8-xNbx]Fe is reached by increasing Nb and decreasing Si simultaneously in [Si-B2Fe7.6Nb0.4]Fe basal glass alloys. The experimental results show that bulk glass alloys with d(c)=2.5 mm are available over a wide range of compositions from (x=0.5, y=0.05) to (x=0.9, y=0.25). Excellent magnetic softness with high saturation magnetizations (B-s=1.14 similar to 1.46 T) and low coercive forces (H-c=1.6 similar to 6.7 A/m) is found in the [Si-B(2)Fes Nb]Fe (x=0.2 similar to 0.6) series glass alloys. A high fracture strength of 4220 MPa with a plasticity of 0.5% is observed in the [(Si0.95B0.05)-B2Fe7.5Nb0.5]Fe bulk glass alloy.

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Preparation of Bulk Amorphous Fe–Ni–P–B–Ga Alloys from Industrial Raw Materials

Effects of Ga,In additions of the Glass Forming Ability of Fe40Ni40P14B6 Eutectic Alloy

Preparation and Properties of Fe_(73-χ)Nb_4Hf_3Y_χB_(20)bulk Amorphous Alloys

Ferromagnetic Bulk Amorphous Alloys

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Effect of Ni Addition on the Glass-Forming Ability and Soft-Magnetic Properties of FeNiBPNb Metallic Glasses

Thermal Stability And Magnetic Properties Of Bulk Amorphous Fe-Al-Ga-P-C-B-Si Alloys

Formation of ferromagnetic bulk amorphous Fe40Ni40P14B6 alloys

Preparation of Al-based bulk amorphous alloys and properties of Al/Al-Fe-V amorphous composites

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

Preparation and Crystallization Kinetics of Fe-based Bulk Amorphous Alloy

FeNiPBNb Bulk Glassy Alloys with Good Soft-Magnetic Properties

Glass-forming Ability and Thermal Stability of Fe-Co-Ni-Zr-Mo-W-B Bulk Amorphous Alloys

COMPOSITION DESIGN AND OPTIMIZATION OF Fe-B-Si-Nb BULK AMORPHOUS ALLOYS

Formation of Fe60Co8Zr10Mo5W2B15 Bulk Amorphous Alloy and Influences of Subsequent Heat Treatment on the Properties

Preparation of Bulk Pr-Fe-Al Amorphous Alloys and Characterization of Their Hard Magnetic Properties

Bulk Metglas, Finemet and Nanoperm Soft Magnetic Alloys Prepared by Ultra-High-pressure Consolidation

Fesibpnbcu Bulk Nanocrystalline Alloys With High Gfa And Excellent Soft-Magnetic Properties

Bulk Amorphous Alloys with High Mechanical Strength and Good Soft Magnetic Properties in Fe–TM–B (TM=IV–VIII Group Transition Metal) System

Effects of P addition on the glass forming ability, crystallization behaviour and soft magnetic properties of FeNi-based amorphous alloy