Abstract:Aiming to unraveling the effects and mechanisms of Nb and Fe additions on glass-forming ability (GFA) and magnetic properties, especially coercivity (H c) on Co-based metallic glasses, 2–4 at% Nb and/or 7.15–28.6 at% Fe have been alloyed into a Co71.5Gd3.5B25 alloy by substitution of Co. The results show that alloying either Nb or Fe into the base alloy leads to enhanced stability of supercooled liquid and GFA, and bulk metallic glass (BMG) can be formed for the alloy with 4 at% Nb or 28.6 at% Fe. Combined addition of Nb and Fe further improves the thermal stability and GFA, and lowers viscosity in supercooled liquid state. A (Co0.6Fe0.4)67.5Gd3.5Nb4B25 BMG possess a wide supercooled liquid region (ΔT x) of 85 K, critical sample diameter of 3.0 mm, and minimum viscosity coefficient of 2 × 108 Pa∙s. The enrichment of Fe increases saturation magnetic flux density (B s), H c, and saturation magnetostriction coefficient (λ s) of the (Co, Fe)-Gd-B-(Nb) metallic glasses; the addition of Nb effectively inhibits the deterioration of magnetic softness caused by Fe while reducing the B s. The (Co0.6–0.9Fe0.1–0.4)67.5Gd3.5Nb4B25 BMGs possess good soft magnetic properties with the B s and H c ranging 0.43–0.69 T and 2.3–5.0 A/m, respectively. Ab initio molecular dynamics simulations indicated that alloying Fe into the Co-based metallic glasses leads to enhanced magnetic anisotropy energy. The increased magnetic anisotropy arising from enlarged λ s results in the increased H c. The combination of high GFA, large ΔT x, low viscosity, and good soft magnetic properties makes the Co-based Co-Fe-Gd-Nb-B BMGs highly promising for applications as micro electromagnetic devices produced through thermoplastic forming.

Effects of Ga,In additions of the Glass Forming Ability of Fe40Ni40P14B6 Eutectic Alloy

Preparation of Bulk Amorphous Fe–Ni–P–B–Ga Alloys from Industrial Raw Materials

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Glass-forming ability and thermal stability of Gd55-xNd xCo20Al25 metallic glass

Effect of Fe addition on the glass-forming ability, stability, and mechanical properties of Zr50Cu34-xFexAl8Ag8 metallic glasses

The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass

Effects of Co Substitution for Fe on the Glass Forming Ability and Properties of Fe80P13C7 Bulk Metallic Glasses

Effects of Fe Addition on Glass-Forming Ability and Mechanical Properties of Ti–Zr–Be Bulk Metallic Glass

Effect of Nb Addition on the Glass-Forming Ability, Soft-Magnetic Properties and Mechanical Properties of CoFeNiBSiNb Bulk Glassy Alloys

Glass forming ability, mechanical and magnetic properties in Fe–W–Y–B alloys

Effects of Ni Substitution for Fe/Co on Mechanical and Magnetic Properties of Co-based Bulk Metallic Glasses

Effects and mechanisms of Nb and Fe additions on glass-forming ability and magnetic properties of a Co71.5Gd3.5B25 metallic glass

Effects of minor Cu and Si additions on glass forming ability and mechanical properties of Co-Fe-Ta-B Bulk metallic glass

Effect of Cu addition on the GFA, structure and properties of Fe-Co-based alloy

Fe–C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass

Fabrication and Soft Magnetic Properties of Fe–B–Si–Zr/Hf–Cu Nanocrystalline Alloys with High Glass-Forming Ability

Effects of Mo Additions on the Glass-Forming Ability and Magnetic Properties of Bulk Amorphous Fe-C-Si-B-P-Mo Alloys

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Effect of partial substitution of Cr with Co on glass forming ability, mechanical and magnetic properties in Fe48Mo14Cr15-xCoxB6P8Si7Y2 bulk metallic glasses

Effects of nanocrystal formation on the soft magnetic properties of Fe-based bulk metallic glasses