Abstract:Aiming to unraveling the effects and mechanisms of Nb and Fe additions on glass-forming ability (GFA) and magnetic properties, especially coercivity (H c) on Co-based metallic glasses, 2–4 at% Nb and/or 7.15–28.6 at% Fe have been alloyed into a Co71.5Gd3.5B25 alloy by substitution of Co. The results show that alloying either Nb or Fe into the base alloy leads to enhanced stability of supercooled liquid and GFA, and bulk metallic glass (BMG) can be formed for the alloy with 4 at% Nb or 28.6 at% Fe. Combined addition of Nb and Fe further improves the thermal stability and GFA, and lowers viscosity in supercooled liquid state. A (Co0.6Fe0.4)67.5Gd3.5Nb4B25 BMG possess a wide supercooled liquid region (ΔT x) of 85 K, critical sample diameter of 3.0 mm, and minimum viscosity coefficient of 2 × 108 Pa∙s. The enrichment of Fe increases saturation magnetic flux density (B s), H c, and saturation magnetostriction coefficient (λ s) of the (Co, Fe)-Gd-B-(Nb) metallic glasses; the addition of Nb effectively inhibits the deterioration of magnetic softness caused by Fe while reducing the B s. The (Co0.6–0.9Fe0.1–0.4)67.5Gd3.5Nb4B25 BMGs possess good soft magnetic properties with the B s and H c ranging 0.43–0.69 T and 2.3–5.0 A/m, respectively. Ab initio molecular dynamics simulations indicated that alloying Fe into the Co-based metallic glasses leads to enhanced magnetic anisotropy energy. The increased magnetic anisotropy arising from enlarged λ s results in the increased H c. The combination of high GFA, large ΔT x, low viscosity, and good soft magnetic properties makes the Co-based Co-Fe-Gd-Nb-B BMGs highly promising for applications as micro electromagnetic devices produced through thermoplastic forming.

Glass forming ability, mechanical and magnetic properties in Fe–W–Y–B alloys

Roles of Y and Fe contents on glass-forming ability, thermal stability, and magnetic properties of Co-based Co–Fe–Y–B bulk metallic glasses

Are There Two Glass Transitions in Fe–M–Y–B (M = Mo, W, Nb) Bulk Metallic Glasses?

Preparation and Properties of Fe_(73-χ)Nb_4Hf_3Y_χB_(20)bulk Amorphous Alloys

Effects of Ga,In additions of the Glass Forming Ability of Fe40Ni40P14B6 Eutectic Alloy

Origin of High Glass Forming Ability of Y-containing FeB-based Alloys

Effect of Y element on atomic structure, glass forming ability and magnetic properties of FeBC alloy

Mechanical and magnetic properties of (Fe72Mo4B24)100−xTbx (x=4, 5, 6, 7at.%) bulk glassy alloys

Thermal and Magnetic Properties of Ternary Fe-B-C and Quaternary Fe-B-C-Si Alloys with High Glass-Forming Ability and High Magnetization

Thermal, magnetic and mechanical properties of (Fe 1 − x Co x ) 68 Dy 6 B 22 Nb 4 bulk metallic glasses

Soft magnetic ternary and quarternary Y-M-B bulk metallic glasses (M= Fe, Co, Ni)

Glass Forming Ability, Magnetic and Mechanical Properties of (fe72mo4b24)100−xdyx (x = 4–7) Bulk Metallic Glasses

Investigation of glass forming ability, crystallization behavior, and soft magnetic properties of Fe–B–P–C–Cu alloy ribbons

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Unveiling the role of Y content in glass-forming ability and soft magnetic properties of Co-Y-B metallic glasses by experiment and ab initio molecular dynamics simulations

Effects and mechanisms of Nb and Fe additions on glass-forming ability and magnetic properties of a Co71.5Gd3.5B25 metallic glass

Effects of Mo Additions on the Glass-Forming Ability and Magnetic Properties of Bulk Amorphous Fe-C-Si-B-P-Mo Alloys

Fabrication and Soft Magnetic Properties of Fe–B–Si–Zr/Hf–Cu Nanocrystalline Alloys with High Glass-Forming Ability

Magnetic Properties and Glass-Forming Ability of Modified Fe–P–Si–B Bulk Amorphous Alloys

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Theoretical Prediction and Experimental Validation of the Glass-Forming Ability and Magnetic Properties of Fe-Si-B Metallic Glasses from Atomic Structures