Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Jia Xu,Xin Liu,Guotai Wang,Ting Luo,Jian Wang,Kechao Lu,Yuanzheng Yang

DOI: https://doi.org/10.1016/j.jallcom.2020.157850

IF: 6.2

2021-04-01

Journal of Alloys and Compounds

Abstract:Effects of the minor addition of similar ferromagnetic elements (Fe, Co, Ni, and Gd), metal element with strong non-metallic properties (Al), and transition metal elements with large atomic radius (V, Hf, Ti, and Cr) on crystallization behavior, magnetic properties and bending ductility of Fe85Si0·5B9P4Cu0·5C0.1M0.9 alloys were systematically investigated. The addition of Al, Ni, and Co improves the thermal stability and inhibits the growth of the α-Fe grains. Besides, Gd addition causes a large temperature interval, which suppresses the precipitation of secondary phase. Through the optimum heat treatments, the nanocrystalline alloys exhibit excellent soft magnetic properties, such as higher Ms of 191.7–208.7 emu/g and lower Hc of 6.7–12.1 A/m. Due to the nature of brittleness, the shear morphology induced by elemental microalloying is critical for understanding microscopic mechanism of plastic deformation and achieving high toughness amorphous alloys. We demonstrate that the formation of shear bands are related to the degree of amorphization, shear transformation zones and Poisson’s ratio.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

The paper aims to address the application issues of iron-based nanocrystalline soft magnetic materials in terms of high saturation magnetization (Ms) and low coercivity (Hc). Specifically, the paper explores how the addition of microalloying elements (such as Fe, Co, Ni, Gd, Al, V, Hf, Ti, and Cr) can improve the amorphous forming ability (AFA), thermal stability, soft magnetic properties, and bending ductility of high-Fe content FeSiBCuPC alloys. The main objectives include:

1. **Improving Amorphous Forming Ability**: Enhancing the amorphous forming ability of the alloy by adding different elements, making it easier to prepare amorphous precursors.
2. **Optimizing Thermal Stability**: Improving the thermal stability of the alloy through microalloying methods, enabling better performance during subsequent heat treatments.
3. **Enhancing Soft Magnetic Properties**: Optimizing the alloy composition to achieve higher saturation magnetization (Ms) and lower coercivity (Hc) after heat treatment, thereby enhancing its soft magnetic properties.
4. **Improving Bending Ductility**: Investigating the impact of different microalloying elements on the micro-mechanisms of plastic deformation in the alloy to achieve high-toughness amorphous alloys.

Through these studies, the paper hopes to find a new type of iron-based nanocrystalline soft magnetic material that is cost-effective and has excellent performance to meet the application needs of power electronic devices (such as distribution transformers, current transformers, and magnetic amplifiers).