Abstract:Preparation of Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets by the strip casting technique and subsequent mechanical alloying method are investigated. The result shows that the cooling rate of NdFe11Mo1 starting materials has great effects on the magnetic properties of the final Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets, and the rapid solidification is helpful for improving magnetic properties. The nanocomposite magnets starting from strip have a Br of 65emu∕g, an iHc of 8372Oe, and a (BH)max of 7.3MGOe, which is better than those of the corresponding materials starting from the conventional ingots. x-ray diffraction and scanning electron microscopy observations for the strips and the ingots show that not only the strip have much more 1:12 main phase and lower Fe-rich phase but also the distribution of 1:12 phase and Fe-rich phase in the strips are more uniform. The strips with the uniform microstructure are not only found to improve the efficiency of the high energy ball milling but also avoid the presence of excessive α-Fe nuclei. High resolution transmission electron microscopy observations show that the mechanically alloyed powders starting from the strips also have more homogeneous microstructure. In the end, the exchange coupling interactions are studied by the ratio of remanence coercivity Hr to the intrinsic coercivity Hc (Hr∕Hc). The Hr∕Hc of the nanocomposite magnets is found to be 1.25, while that of single phase Nd(Fe,Mo)12NX material is about 1.0. This shows that there exists strong exchange spring effect between the hard phase Nd(Fe,Mo)12NX and soft phase α-Fe.

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Fe64b22.8nd6.6y3.9nb2.7 Bulk Nanocomposite Magnets with Improved Size and Magnetic Properties

Nd 5Fe 64B 23Mo 4Y 4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Novel Exchange-Coupled SmFe3/α-Fe Nanocomposite Magnets Fabricated by Magnetic Annealing

The magnetic, structure and mechanical properties of rapidly solidified (Nd7Y2.5)–(Fe64.5Nb3)–B23 nanocomposite permanent magnet

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Magnetic and Microstructural Properties of Nd7fe67b22mo3zr0.5ti0.5 Nanocomposite Magnets Produced by Injection Casting

Synthesis, Structural and Magnetic Properties of the Nanocomposite Fe63B23Nd7Y3Nb3Cr1 Magnets

Rapidly solidified Nd7Fe67B22Mo 3Zr1 nanocomposite permanent magnets

Nanocomposite Nd-Y-Fe-B-Mo Bulk Magnets Prepared by Injection Casting Technique

Bulk Α-Fe/nd2fe14b Nanocomposite Magnets Produced by Severe Plastic Deformation Combined with Thermal Annealing

Structural and Magnetic Studies of Bulk Nanocomposite Magnets Derived from Rapidly Solidified Pr-(Fe,Co)-(Zr,Nb)-B Alloy

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Role of Amorphous Grain Boundaries in Nanocomposite NdFeB Permanent Magnets

Magnetic Properties and Microstructure of Fe69.5–Nd7B21Nb2.5Ga (x=0–1) Alloys

Preparation of Anisotropic Nd(Fe,Mo)(12)N-X Magnetic Materials by the Strip-Casting Technique

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

Nanoscale Structure and Magnetic Properties of Nd-Fe-nb-b-c Permanent Magnets

Fe69B20.2Nd4.2Nb3.3Y2.5Zr0.8 Magnets Produced by Injection Casting

Fe69B20.2Nd4.2Nb3.3Y 2.5Zr0.8 magnets produced by injection casting

Study On The Magnetic Properties And Microstructure Of Nd-Fe-B Nanocomposite Permanent Magnets