Abstract:Preparation of Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets by the strip casting technique and subsequent mechanical alloying method are investigated. The result shows that the cooling rate of NdFe11Mo1 starting materials has great effects on the magnetic properties of the final Nd(Fe,Mo)12NX∕α-Fe nanocomposite magnets, and the rapid solidification is helpful for improving magnetic properties. The nanocomposite magnets starting from strip have a Br of 65emu∕g, an iHc of 8372Oe, and a (BH)max of 7.3MGOe, which is better than those of the corresponding materials starting from the conventional ingots. x-ray diffraction and scanning electron microscopy observations for the strips and the ingots show that not only the strip have much more 1:12 main phase and lower Fe-rich phase but also the distribution of 1:12 phase and Fe-rich phase in the strips are more uniform. The strips with the uniform microstructure are not only found to improve the efficiency of the high energy ball milling but also avoid the presence of excessive α-Fe nuclei. High resolution transmission electron microscopy observations show that the mechanically alloyed powders starting from the strips also have more homogeneous microstructure. In the end, the exchange coupling interactions are studied by the ratio of remanence coercivity Hr to the intrinsic coercivity Hc (Hr∕Hc). The Hr∕Hc of the nanocomposite magnets is found to be 1.25, while that of single phase Nd(Fe,Mo)12NX material is about 1.0. This shows that there exists strong exchange spring effect between the hard phase Nd(Fe,Mo)12NX and soft phase α-Fe.

Magnetic and Microstructural Properties of Nd7fe67b22mo3zr0.5ti0.5 Nanocomposite Magnets Produced by Injection Casting

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Magnetostriction and electrical resistivity of Sm0.88Nd0.12Fe1.93 bonded composites

Rapidly solidified Nd7Fe67B22Mo 3Zr1 nanocomposite permanent magnets

The magnetic, structure and mechanical properties of rapidly solidified (Nd7Y2.5)–(Fe64.5Nb3)–B23 nanocomposite permanent magnet

Nanocomposite Nd-Y-Fe-B-Mo Bulk Magnets Prepared by Injection Casting Technique

Synthesis, Structural and Magnetic Properties of the Nanocomposite Fe63B23Nd7Y3Nb3Cr1 Magnets

Fe64b22.8nd6.6y3.9nb2.7 Bulk Nanocomposite Magnets with Improved Size and Magnetic Properties

Nd 5Fe 64B 23Mo 4Y 4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Fe69B20.2Nd4.2Nb3.3Y2.5Zr0.8 Magnets Produced by Injection Casting

Fe69B20.2Nd4.2Nb3.3Y 2.5Zr0.8 magnets produced by injection casting

Effect of Nd Content on Magnetic Properties and Microstructure of Nd_xFe_(90.5-x)Zr_(3.0)B_(6.5_)Nanocomposite Magnets with the Big Zr Content

Preparation of Anisotropic Nd(Fe,Mo)(12)N-X Magnetic Materials by the Strip-Casting Technique

Magnetic Properties Of Nanocomposite Fe88-Xmxnd6b6 Magnets (M = Zr Or Nb) By Rapid Thermal Annealing

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

High Coercivity (nd 8 Y 3 )–(fe 62 Nb 3 Cr 1 )–B 23 Magnets Produced by Injection Casting

Effects of gadolinium and silicon substitution on magnetic properties and microstructure of Nd–Fe–B–Nb bulk nanocomposite magnets

Structural and Magnetic Studies of Bulk Nanocomposite Magnets Derived from Rapidly Solidified Pr-(Fe,Co)-(Zr,Nb)-B Alloy

Microstructure And Magnetic Properties Of Bulk Nanocomposite Magnets Prepared By Crystallizing Amorphous Nd3.6pr5.4fe80co3b7nb1 Under High Pressure

Study On The Magnetic Properties And Microstructure Of Nd-Fe-B Nanocomposite Permanent Magnets

Effects of Nb and Zr additions on crystallization behavior, microstructure and magnetic properties of melt-spun (Nd,Pr)2Fe14B/α-Fe alloys