Abstract:The microstructure–property relation in ferroelectric/ferromagnetic composite is investigated in detail, exemplified by typical sol–gel-derived 0.3BTO/0.7NZFO ceramic composite. The effect of microstructural factors including intergrain connectivity, grain size and interfaces on the dielectric and magnetic properties of the composite prepared by conventional ceramic method and three-step sintering method is discussed both experimentally and theoretically. It reveals that the dielectric behavior of the composite is controlled by a hybrid dielectric process that combines the contribution of Debye-like dipoles and Maxwell–Wagner (M–W or interfacial) polarization. Enhanced dielectric, magnetic and conductive behaviors appear in the composite with better intergrain connectivity and larger grain size derived by sol–gel route and three-step sintering method. The effective permittivity contributed by Debye-like dipoles exhibits a value of ~130,000 in three-step sintered composite, which is almost the same as that in conventionally sintered one, but that contributed by M–W response is much smaller in the former. Compared with conventionally prepared samples, the relaxation time (τ) is 3.476 × 10−6 s, about one order of magnitude smaller, and the dc electrical conductivity is 3.890 × 10−3 S/m, one order of magnitude higher in three-step sintered composite. The minimum dielectric loss reveals almost the same (~0.2) for all samples, but shows distinguishable difference in low-frequency region. Meanwhile, an initial permeability of 84, twice as large as that of conventionally prepared composite and 56 % the value of single-phased NZFO ferrite (~150), and a saturation magnetization of 63.5 emu/g, 32 % higher than that of conventional one and approximately 84 % the value of single-phased NZFO ferrite (~76 emu/g), appear simultaneously in three-step sintered composite with larger grain size and better intergrain connectivity. It is clear that the discovery is helpful for establishing a more explicit view on the physics of multi-functional composite materials, while the composite with optimized microstructure is beneficial to be used as a high-performance material.

Magnetostriction and electrical resistivity of Sm0.88Nd0.12Fe1.93 bonded composites

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Solid-state Synthesis and High Magnetostriction Performances of Heavy Rare Earth–Free Sm0.88Nd0.12Fex Particulate Composites

Large Magnetostriction of Nd0.2Tb0.3Dy0.5Fe1.93/epoxy Composites in a Wide Temperature Range

Magnetostrictions of Sm Fe and Sm Fe N

Magnetostrictions of Sm$_{2}$Fe$_{17}$ and Sm$_{2}$Fe$_{17}$N$_{3}$

Dynamic Magnetoelastic Properties Of Epoxy-Bonded Sm0.88nd0.12fe1.93 Pseudo-1-3 Negative Magnetostrictive Particulate Composite

Structure and magnetic properties of mechanically alloyed Tb0.7Pr0.3(Fe0.9B0.1)1.93 and the magnetostriction of its epoxy composites

Magnetostrictions of Sm<formula formulatype="inline"><tex Notation="TeX">$_{2}$</tex></formula>Fe<formula formulatype="inline"><tex Notation="TeX">$_{17}$</tex></formula> and Sm<formula formulatype="inline"><tex Notation="TeX">$_{2}$</tex></formula>Fe<formula formulatype="inline"><tex Notation="TeX"

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

Magnetic Properties and Microstructures of Nanocomposite Nd9Fe85-xMnxB6

Relation Between the Microstructure and the Electromagnetic Properties of BaTiO 3 /ni 0.5 Zn 0.5 Fe 2 O 4 Ceramic Composite

The magnetic, structure and mechanical properties of rapidly solidified (Nd7Y2.5)–(Fe64.5Nb3)–B23 nanocomposite permanent magnet

Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials

Bending Properties of Epoxy Resin Matrix Composites Filled with Ni–Mn–Ga Ferromagnetic Shape Memory Alloy Powders

Effects of manganese substitution on magnetic and magnetostrictive properties of Tb0.5Dy0.5(Fe1-xMnx)1.92/epoxy composites with spherical single-crystal particles*

Magnetostrictions and Magnetic Properties of Nd-Fe-B and Srfe12o19

Influence of Microstructural Features on the Effective Magnetostriction of Composite Materials

Magnetostrictive Properties of the Heavy-Rare-Earth-Free Sm1-Xndxfe2 Compounds

Magnetic and Microstructural Properties of Nd7fe67b22mo3zr0.5ti0.5 Nanocomposite Magnets Produced by Injection Casting

Mechanical properties and microstructure of Nd-Fe-B magnet diffused by low melting point alloys