The magnetic, structure and mechanical properties of rapidly solidified (Nd7Y2.5)–(Fe64.5Nb3)–B23 nanocomposite permanent magnet

Zubair Ahmad,Shan Tao,Tianyu Ma,Guoliang Zhao,Mi Yan

DOI: https://doi.org/10.1016/j.jallcom.2011.06.092

IF: 6.2

2011-01-01

Journal of Alloys and Compounds

Abstract:The Nd7Y2.5Fe64.5Nb3B23 nanocomposite permanent magnets in the form of rods with 2mm in diameter have been developed by annealing the amorphous precursors produced by copper mold casting technique. The phase evolution, structure, magnetic and mechanical properties were investigated with X-ray diffractometry, differential scanning calorimetry, electron microscopy, magnetometry and universal uniaxial compression strength techniques. The heat treatment conditions under which the magnets attained maximum magnetic and mechanical properties have been established. The results indicate that magnet properties are sensitive to grain size and volume content of the magnetic phases present in the microstructure. The composite microstructure was mainly composed of soft α-Fe (20–30nm) and hard Nd2Fe14B (45–65nm) magnetic phase grains. The maximum coercivity of 959.18kA/m was achieved with the magnets annealed at 760°C whereas the highest remanence of 0.57T was obtained with the magnets treated at 710°C. The optimally annealed magnets possessed promising magnetic properties such as jHc of 891.52kA/m, Br of 0.57T, Mr/Ms=0.68, (BH)max of 56.8kJ/m3 as well as the micro-Vickers hardness (Hv) of 1138±20 and compressive stress (σf) of 239±10MPa.