Abstract:Co-based (Co, Fe)75B15Si7P3 bulk metallic glasses (BMGs) without any early transition metal or rare-earth elements have been successfully developed, which possess outstanding soft magnetic properties with high saturation magnetic flux density (Bs) and good mechanical properties. Addition of an appropriate amount of P into a Co75B15Si10 alloy promotes the occurrence of glass transition and increases the stability of the supercooled liquid, and a Co75B15Si7P3 metallic glass exhibits a large supercooled liquid region of 33 K. Subsequent replacement of Co by 15–35 at.% Fe enhances the glass-forming ability (GFA) of the Co75B15Si7P3 alloy, and the BMG rods with diameters up to 2.0 mm are obtained. The improved GFA might be originated from the high thermal stability of the alloy melts as indicated from the large undercoolings. The Co-based (Co, Fe)75B15Si7P3 BMGs possess low coercivity of 0.8–4.6 A/m, high Bs of 1.02–1.24 T, effective permeability of 12700–18500 at 1 kHz, and Curie temperature of 739–789 K, indicating superior soft magnetic properties compared to other reported Co-based BMGs. The BMGs also exhibit high compressive yield strength of 3343–3590 MPa with distinct plastic strain up to 2.7% and high Vickers hardness of 1150–1175. The combination of high GFA and excellent soft magnetic and mechanical properties makes the Co-based BMGs a good prospect of functional materials.

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

Effects of Cu Additions on Mechanical and Soft-Magnetic Properties of CoFeBSiNb Bulk Metallic Glasses

Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties

Co-Based Bulk Metallic Glasses with Good Soft-Magnetic Properties and High Strength

Novel Soft Magnetic Co-Based Ternary Co–Er–B Bulk Metallic Glasses

Soft magnetic Co-based Co–Fe–B–Si–P bulk metallic glasses with high saturation magnetic flux density of over 1.2 T

A Novel FeNi-based Bulk Metallic Glass with High Notch Toughness over 70 MPa M1/2 Combined with Excellent Soft Magnetic Properties

Enhancement of glass-forming ability and thermal stability of a soft magnetic Co75B25 metallic glass by micro-alloying Y and Nb

Thermal, magnetic and mechanical properties of (Fe 1 − x Co x ) 68 Dy 6 B 22 Nb 4 bulk metallic glasses

Preparation and properties of new non-magnetic Co-based bulk metallic glasses

A Plastic FeNi-based Bulk Metallic Glass and Its Deformation Behavior

Co- and Fe-based multicomponent bulk metallic glasses designed by cluster line and minor alloying

Ductile Ni-based bulk metallic glasses at room temperature

Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling

Effects of Ni Substitution for Fe/Co on Mechanical and Magnetic Properties of Co-based Bulk Metallic Glasses

Ternary Co-W-B bulk metallic glasses with ultrahigh strength

Role of Fe substitution for Co on thermal stability and glass-forming ability of soft magnetic Co-based Co-Fe-B-P-C metallic glasses

Soft Magnetic Fe25Co25Ni25(B, Si)25 High Entropy Bulk Metallic Glasses

Enhanced Glass Forming Ability of Fe–Co–Zr–Mo–W–B Alloys with Ni Addition

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength