Abstract:Exceptional ductility has been a long-sought-after property of metallic glasses, and cryogenic thermal cycling rejuvenation has been actively explored to enhance the plasticity of metallic glasses. By tuning the holding time and number of cycles of cryogenic thermal cycling processing, we here report a (Zr 0.8125 Cu 0.1875 ) 79 Ni 10 Al 10 Nb 1 metallic glass of peak rejuvenation with the plasticity of an order of magnitude higher than that of the as-cast glass, without sacrificing its strength. Characterizations indicate that the loose atomic packing of the metallic glass of peak rejuvenation facilitates the generation and proliferation of shear bands in the early stage of plastic deformation, and the resultant dense shear bands tend to be deflected due to their interaction with each other and/or structural inhomogeneity in the matrix, hindering their rapid propagation and in turn increasing the plasticity. The combination of high relaxation enthalpy and high plasticity obtained here is outstanding from the previous rejuvenated metallic glasses which have either high relaxation enthalpy or high plasticity, while never both. This work identifies an alloy system with very high efficiency in plasticity improvement through cryogenic thermal cycling rejuvenation and represents a promising guide for improving the plasticity of metallic glasses.

Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling

Efficient Rejuvenation of Heterogeneous {[(fe0.5co0.5 ) 0.75 B 0.2 Si0.05 ]96nb4 }99.9cu0.1 Bulk Metallic Glass Upon Cryogenic Cycling Treatment

Enhancing the plasticity of a Ti-based bulk metallic glass composite by cryogenic cycling treatments

Cryogenic thermal cycling induced simultaneous improvement of strength and ductility in a Zr-based bulk metallic glass composite

Large tensile plasticity induced by pronounced β -relaxation in Fe-based metallic glass via cryogenic thermal cycling

A Plastic FeNi-based Bulk Metallic Glass and Its Deformation Behavior

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Effects of Cu Additions on Mechanical and Soft-Magnetic Properties of CoFeBSiNb Bulk Metallic Glasses

Flow serrations of rejuvenation behaviour through cryogenic thermal cycling for Zr-based bulk metallic glass

Improved ductility of annealed Fe-based metallic glass with good soft magnetic property by cryogenic thermal cycling

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Atomic-scale icosahedral short-range ordering in a rejuvenated Zr-based bulk metallic glass upon deep cryogenic treatment

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Unusual Gradient Stress Induced Superior Room-Temperature Plasticity in Brittle Ferromagnetic Bulk Metallic Glass

Mechanical Property and Structural Changes by Thermal Cycling in Phase-Separated Metallic Glasses

Tailoring rejuvenation behavior of Zr-based metallic glass upon deep cryogenic cycling treatment

Mechanical cycling-induced evolution of structure and local mechanical properties in a PdCuNiP bulk metallic glass

An order of magnitude enhancement in ductility of a metallic glass of peak rejuvenation

Fe-Based Bulk Metallic Glass with High Plasticity