Abstract:Metallic glasses are spatially heterogeneous at the nanometer scale. However, the effects of external excitation on their structural and mechanical heterogeneity and the correlation to their properties are still unresolved. Nanoindentation, atomic force microscopy (AFM) and high-resolution transmission electron microscopy (HRTEM) were carried out to explore the effects of cryogenic thermal cycling (CTC) on mechanical/structural heterogeneity, nanoscale creep deformation and optical properties of nanostructured metallic glass thin films (MGTFs). The results indicate that CTC treatment alters the distribution fluctuations of hardness/modulus and energy dissipation and results in an increase-then-decrease variation in mechanical heterogeneity. By applying Maxwell–Voigt model, it can be shown that CTC treatment results in a remarkable activation of more defects with longer relaxation time in soft regions but has only a slight effect on defects in hard regions. In addition, CTC treatment increases the transition time from primary-state stage to steady-state stage during creep deformation. The enhanced optical reflectivity of the MGTFs after 15 thermal cycles can be attributed to increased aggregation of Cu and Ni elements. The results of this study shed new light on understanding mechanical/structural heterogeneity and its influence on nanoscale creep deformation and optical characteristics of nanostructured MGTFs, and facilitate the design of high-performance nanostructured MGTFs.

Large tensile plasticity induced by pronounced β -relaxation in Fe-based metallic glass via cryogenic thermal cycling

Efficient Rejuvenation of Heterogeneous {[(fe0.5co0.5 ) 0.75 B 0.2 Si0.05 ]96nb4 }99.9cu0.1 Bulk Metallic Glass Upon Cryogenic Cycling Treatment

Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling

Mechanical Property and Structural Changes by Thermal Cycling in Phase-Separated Metallic Glasses

Accelerating structural relaxation of shear band at ambient conditions through cryogenic thermal-cycling

Significant rejuvenation of a deformed metallic glass contributed by shear band affected zones during cryogenic cycling

Effects of cryogenic thermal cycling on a La-based metallic glass: Relaxation or rejuvenation?

Enhancing the plasticity of a Ti-based bulk metallic glass composite by cryogenic cycling treatments

Rejuvenation of a deformed metallic glass dominated by immature shear band zones during cryogenic thermal cycling

Contribution of cryogenic thermal cycling to the atomic dynamics in a La-based bulk metallic glass with different initial states

Anelastic-like nature of the rejuvenation of metallic glasses by cryogenic thermal cycling

Multi-scale Inhomogeneity and Anomalous Mechanical Response of Nanoscale Metallic Glass Pillar by Cryogenic Thermal Cycling

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

Improved ductility of annealed Fe-based metallic glass with good soft magnetic property by cryogenic thermal cycling

Thermal cycling-induced evolution of structure and local mechanical properties in metallic glass

Origin of Different Thermal Cycling Effects in Fe80P20 and Ni60Nb40 Metallic Glasses

Cryogenic thermal cycling induced simultaneous improvement of strength and ductility in a Zr-based bulk metallic glass composite

Effect of cryogenic cycling on mechanical properties of ZrTiCuNiBe bulk metallic glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Tailoring mechanical heterogeneity, nanoscale creep deformation and optical properties of nanostructured Zr-based metallic glass

Influence of Deep Cryogenic Cycling on the Rejuvenation and Plasticization of TiZrHfBeCu High-Entropy Bulk Metallic Glass