Abstract:The rejuvenation behavior of Cu–Zr binary metallic glasses with different holding times in both ambient and cryogenic temperatures during deep cryogenic cycling treatment were investigated in details. The degrees of rejuvenation, the structure and properties were investigated by both experiments and simulation. It is found that the holding times can significantly affect the rejuvenation behavior. The samples with different holding times can be either aged or rejuvenated, that is, the shorter holding times could effectively rejuvenate the samples, while the longer holding times aged the samples. Such phenomenon can be observed from both experimental and simulation results. It is also found that the fraction of liquid-like structure increases while solid-like structure decreases in the short-range ordered structures for those rejuvenated samples, leading to a more heterogeneous structure. Such changes in local atomic structure contributes to the improvement in the mechanical properties, which is related to delocalization of the shearing events and the formation of more shear-transformation zones. The present study contributes to the understanding of the correlation between the treatment parameters during deep cryogenic cycling treatment and the rejuvenation behavior, as well as the structural evolution.

Influence of Deep Cryogenic Cycling on the Rejuvenation and Plasticization of TiZrHfBeCu High-Entropy Bulk Metallic Glass

Effect of cryogenic cycling on mechanical properties of ZrTiCuNiBe bulk metallic glass

Enhancing the plasticity of a Ti-based bulk metallic glass composite by cryogenic cycling treatments

Tailoring rejuvenation behavior of Zr-based metallic glass upon deep cryogenic cycling treatment

Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation

Significant rejuvenation of a deformed metallic glass contributed by shear band affected zones during cryogenic cycling

Non-monotonic influence of cryogenic thermal cycling on rejuvenation and impact toughness of Ti-based bulk metallic glass composites

Cryogenic thermal cycling induced simultaneous improvement of strength and ductility in a Zr-based bulk metallic glass composite

Flow serrations of rejuvenation behaviour through cryogenic thermal cycling for Zr-based bulk metallic glass

Deformation behavior of thermally rejuvenated Zr-Cu-Al-(Ti) bulk metallic glass

Anelastic-like nature of the rejuvenation of metallic glasses by cryogenic thermal cycling

Thermal cycling-induced evolution of structure and local mechanical properties in metallic glass

Tribological characteristics of Ti-based bulk metallic glass via deep cryogenic-cycling treatment

Mechanical Property and Structural Changes by Thermal Cycling in Phase-Separated Metallic Glasses

Rejuvenation of a deformed metallic glass dominated by immature shear band zones during cryogenic thermal cycling

Efficient Rejuvenation of Heterogeneous {[(fe0.5co0.5 ) 0.75 B 0.2 Si0.05 ]96nb4 }99.9cu0.1 Bulk Metallic Glass Upon Cryogenic Cycling Treatment

Defects controlled rejuvenation in the Zr47.5Cu47.5Al5 metallic glass

Thermal Rejuvenation of an Mg-Based Metallic Glass

Rejuvenation behavior of Cu–Zr metallic glass under different holding times during deep cryogenic cycling treatment: Experiments and simulation

Cryogenic thermal cycling rejuvenation in metallic glasses: Structural and mechanical assessment

Large tensile plasticity induced by pronounced β -relaxation in Fe-based metallic glass via cryogenic thermal cycling