Abstract:In this work, a series of new Ni 76-x Co x Nb 4 P 16 B 4 (x = 5, 10, 15, in at.%) bulk metallic glasses (BMGs) with the maximum diameter in the range of 1.2–1.6 mm were prepared by combining fluxing and J-quenching technology. The effects of Co content on glass forming ability (GFA), thermal stability, mechanical properties, serrated-flow behaviors and corrosion performance of the present Ni-based BMGs were systematically investigated. The ranges of T g and ΔTx are 664–668 K and 21–31 K, respectively. Uniaxial compressive tests revealed that the present Ni-based BMGs have the compressive plastic strain ( εp ), yield strength ( δ y ), and fracture strength ( δ f ) that range from 16% to 27%, 2.1–2.6 GPa, and 2.2–3.6 GPa, respectively. The unprecedented mechanical properties originate from more icosahedral-like clusters (ILCs) and crystal-like clusters (CLCs) in the present Ni-based BMGs. It is found that the serrated-flow behaviors of the present Ni-based BMGs transition self-organized critical state (SOCs) into chaotic state (Cs) as plasticity decreases. The stick-slip dynamics were used to calculate the average shear-band velocity (ASBV), which shows an increasing trend as the Co content rises from 5 at.% to 15 at.%. Electrochemical measurements in 3.5 wt.% NaCl solution showed that the Ni 71 Co 5 Nb 4 P 16 B 4 BMG has a self-corrosion current density of 3.30 × 10 −8 A/cm 2 and significantly stronger corrosion resistance than austenite 316L and 304L stainless steel. The present Ni-based BMGs have excellent comprehensive performance, which has great potential for industrial applications.

Ternary Co-W-B bulk metallic glasses with ultrahigh strength

Ternary Fe–W–B bulk metallic glasses with ultrahigh thermal stabilities

Ultra-high strength Co–Ta–B bulk metallic glasses: Glass formation, thermal stability and crystallization

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

High-temperature Mo-based bulk metallic glasses

Formation and ultrahigh mechanical strength of multicomponent Co-based bulk glassy alloys

Novel Soft Magnetic Co-Based Ternary Co–Er–B Bulk Metallic Glasses

A Ti–Zr–Be–Fe–Cu Bulk Metallic Glass with Superior Glass-Forming Ability and High Specific Strength

Enhanced Glass Forming Ability of Fe–Co–Zr–Mo–W–B Alloys with Ni Addition

Preparation and properties of new non-magnetic Co-based bulk metallic glasses

OsCo-based high-temperature bulk metallic glasses with robust mechanical properties

Nontoxic, precious-metal-free titanium-based metallic glasses with exceptional glass-forming ability and high specific strength

Mg-based Bulk Metallic Glass Composites with Plasticity and Gigapascal Strength

La-based bulk metallic glasses with critical diameter up to 30mm

Critical size and strength of the best bulk metallic glass former in the Mg–Cu–Gd ternary system

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

A New Cu–Hf–Al Ternary Bulk Metallic Glass with High Glass Forming Ability and Ductility

Ductile Ni-based bulk metallic glasses at room temperature

Lightweight Ti–Zr–Be–Al Bulk Metallic Glasses with Improved Glass-Forming Ability and Compressive Plasticity

The Novel Ti-based Metallic Glass with Excellent Glass Forming Ability and an Elastic Constant Dependent Glass Forming Criterion

Formation of Bulk Metallic Glasses in the Fe–M–Y–B (M = Transition Metal) System