Abstract:A one‐pot molten salt electrochemical etching (E) method is proposed to achieve Ti2C MXene directly from elemental substances (Ti, Al, and C), which greatly simplifies the preparation process. By using carbon sources with different morphologies, such as carbon nanotubes and reduced graphene oxide, MAX and MXene with tuned morphology are prepared based on the "carbon‐template‐growth" mechanism. MXenes, a rapidly growing family of 2D transition metal carbides, carbonitrides, and nitrides, are one of the most promising high‐rate electrode materials for energy storage. Despite the significant progress achieved, the MXene synthesis process is still burdensome, involving several procedures including preparation of MAX, etching of MAX to MXene, and delamination. Here, a one‐pot molten salt electrochemical etching (E) method is proposed to achieve Ti2C MXene directly from elemental substances (Ti, Al, and C), which greatly simplifies the preparation process. In this work, different carbon sources, such as carbon nanotubes (CNT) and reduced graphene oxide (rGO), are reacted with Ti and Al micro‐powders to prepare Ti2AlC MAX with 1D and 2D tuned morphology followed by in situ electrochemical etching from Ti2AlC MAX to Ti2CTx MXene in low‐cost LiCl‐KCl. The introduction of the O surface group via further ammonium persulfate (APS) treatment can act in concert with Cl termination to activate the pseudocapacitive redox reaction of Ti2CClyOz in the non‐aqueous electrolyte, resulting in a Li+ storage capacity of up to 857 C g−1 (240 mAh g−1) with a high rate (86 mAh g−1 at 120 C) capability, which makes it promising for use as an anode material for fast‐charging batteries or hybrid devices in a non‐aqueous energy storage application.

Molten Salt Dynamic Sealing Synthesis of MAX Phases (ti3alc2, Ti3SiC2 Et Al.) Powder in Air

Molten salt-shielded solid-state synthesis (MS5) reaction-driven >99% pure Ti3AlC2 MAX phase: effect of MAX phase purity on the interlayer separation of MXenes and Na-ion storage

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Facile Electrosynthesis of Ti3AlC2 and Its Derived Porous Carbon in Molten Salt

Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes

Maximizing Potential Applications of MAX Phases: Sustainable Synthesis of Multielement Ti3AlC2

Topotactic transition of Ti4AlN3 MAX phase in Lewis acid molten salt

Operando Exploring and Modulating Phase Evolution Chemistry from MAX to MXenes in Molten Salt Synthesis

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene

Liquid Metal Assistant Self-Propagating High-Temperature Synthesis of S-containing High-Entropy MAX-phase Materials

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Molten salt-shielded synthesis of Ti3AlC2 as a precursor for large-scale preparation of Ti3C2Tx MXene binder-free films electrode supercapacitors

Rapid synthesis of high‐yield Ti3AlC2 MAX phase powders from TiC0.67 and Al with induction heating assistance

Molten salt assisted synthesis and electromagnetic wave absorption properties of (V<sub>1−x−y</sub>Ti<sub>x</sub>Cr<sub>y</sub>)<sub>2</sub>AlC solid solutions

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

MS3, physical properties, and formation mechanism of TiV1/3Cr1/3Nb1/3AlC powders: Experimental and first-principles investigation

Synthesis Of Max Phases Nb2cuc And Ti-2(Al0.1cu0.9)N By A-Site Replacement Reaction In Molten Salts

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system