Abstract:MXenes are a large family of two-dimensional materials that have attracted attention across many fields due to their desirable optoelectronic, biological, mechanical and chemical properties. There currently exist many synthesis procedures that lead to differences in flake size, defects and surface chemistry, which in turn affect their properties. Herein, we describe the steps to synthesize Ti 3 C 2 T x —the most important and widely used MXene, from a Ti 3 AlC 2 MAX phase precursor. The procedure contains three main sections: synthesis of Ti 3 AlC 2 MAX, wet chemical etching of the MAX in hydrofluoric acid/HCl solution to yield multilayer Ti 3 C 2 T x and its delamination into single-layer flakes. Three delamination options are described; these use LiCl, tertiary amines (tetramethyl ammonium hydroxide/ tetrabutyl ammonium hydroxide) and dimethylsulfoxide respectively. These procedures can be adapted for the synthesis of MXenes beyond Ti 3 C 2 T x . The MAX phase synthesis takes about 1 week, with the etching and delamination each requiring 2 d. This protocol requires users to have experience working with hydrofluoric acid, and it is recommended that users have experience with wet chemistry and centrifugation; characterization techniques such as X-ray diffraction and particle size analysis are also essential for the success of the protocol. While alternative synthesis methods, such as minimally intensive layer delamination, are desirable for certain MXenes (such as Ti 2 CT x ) or specific applications, this protocol aims to standardize the more commonly used hydrofluoric acid/HCl etching method, which produces Ti 3 C 2 T x with minimal concentration of defects and the highest conductivity and serves as a guideline for those working with MXenes for the first time.

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Synthesis of Ti3alc2 Max Phase Under Vacuum, its Structural Characterisation and Using for Ti3c2tx Mxene Preparation

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

Molten salt-shielded solid-state synthesis (MS5) reaction-driven >99% pure Ti3AlC2 MAX phase: effect of MAX phase purity on the interlayer separation of MXenes and Na-ion storage

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene

Effect of oxygen substitution and oxycarbide formation on oxidation of Ti3AlC2 MAX phase

Synthesis and characterization of a new out-of-plane ordered double-transition-metal MAX phase, Mo2VAlC2, and its two-dimensional derivate Mo2VC2Tx MXene

Self-Propagating High-Temperature Synthesis of Ti3SiC2 and Ti3AlC2 Single-Phase MAX Phases in Mechanically Activated Mixtures of Initial Reactants

Topotactic transition of Ti4AlN3 MAX phase in Lewis acid molten salt

Maximizing Potential Applications of MAX Phases: Sustainable Synthesis of Multielement Ti3AlC2

Synthesis of Ti2AlC in KBr Melt: Effect of Temperature and Component Ratio

First-principles Study for Discovery of Novel Synthesizable 2D High-entropy Transition Metal Carbides (MXenes)

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Theoretical investigation of the MXene precursors MoxV4-xAlC3 (0 ≤ x ≤ 4)

Local chemical bonding and structural properties in Ti3AlC2 MAX phase and Ti3C2Tx MXene probed by Ti 1s X-ray absorption spectroscopy

Comprehensive synthesis of Ti 3 C 2 T x from MAX phase to MXene

Synthesis of MAX Phase Nanofibers and Nanoflakes and the Resulting MXenes

Synthesis of Ti3(SnxAl1−x)C2 solid solutions over the whole composition range

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Molten Salt Dynamic Sealing Synthesis of MAX Phases (ti3alc2, Ti3SiC2 Et Al.) Powder in Air