Abstract:In this study, it was verified that the synthesis of a Ti‐Al‐C MAX phase has advantages when using intermetallic compounds rather than using only elemental powders. The formation behavior of the MAX phase was presented through diffusion experiments. In the case of using elemental powder, Ti2AlC is produced at 1,300°C, and Ti3AlC2 is produced at 1,400°C. When intermetallic compounds are used, Ti2AlC is produced at 1,000°C, and Ti3AlC2 is produced at 1,300°C. In the case of the elemental powder, it is verified that Ti3AlC2 content is decreased and Ti2AlC is increased when heat treatment is performed at 1,400°C for 3 h. Rather Ti3AlC2 content is increased when intermetallic compounds are used. When an intermetallic compound is used, synthesis occurs more actively at high temperatures, and the tendency to be thermally decomposed can be prevented. When TiAl and TiC are heat treated, Al of the intermetallic compound is diffused into TiC, and C of TiC is diffused into the intermetallic compound. Furthermore, there are many two‐dimensional defects in TiAl, which act as a C diffusion channel. C diffuses into TiAl to produce TiCX, and the MAX phase is generated by the short‐range diffusion of Al. In the case of TiC, TiC transform into TiCX after C diffuses into TiAl, which consequently structure of TiC changes from Cubic to Hexagonal. This is the same crystal structure as the MAX phase, and it is confirmed that the (110) surface is maintained. A Ti‐C layer structure of the (110) surface is maintained, and it was determined that Al is diffused during this time to generate MAX phase. This article is protected by copyright. All rights reserved

Synthesis of Ti2AlC in KBr Melt: Effect of Temperature and Component Ratio

Synthesis and Reaction Path of Ti‐Al‐C MAX Phase by Reaction with Ti‐Al Intermetallic Compounds and TiC

The synthesis of high purity Ti3AlC2 MAX phase via molten salt method

Pressureless manufacturing of high purity Ti3AlC2 MAX phase material: Synthesis and characterisation

Synthesis of MAX Phases in the Ti2AlC–V2AlC System as Precursors of Heterometallic MXenes Ti2 – xVxC

Nb2AlC MAX phase synthesis by SHS metallurgy

Synthesis of Ti3alc2 Max Phase Under Vacuum, its Structural Characterisation and Using for Ti3c2tx Mxene Preparation

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system

Manufacturing of High Purity Cr2AlC MAX Phase Material and Its Characterization

The effect of milling time and heat treatment on the synthesis of the Cr2AlC MAX phase

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

(Cr2/3Ti1/3)3AlC2 and (Cr5/8Ti3/8)4AlC3: New MAX‐phase Compounds in Ti–Cr–Al–C System

Synthesis of low-cost Ti3AlC2-Ti2AlC dual MAX phase with high-electrical conductivity using economical raw materials and novel compositions

Effect of Combustion Temperature on Combustion Synthesis of Ti3AlC2 and Ti2AlC

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Rapid synthesis of high‐yield Ti3AlC2 MAX phase powders from TiC0.67 and Al with induction heating assistance

Synthesis of Ti2(In Al1-)C (x = 0–1) solid solutions with high-purity and their properties